CAN Bus Workshop_Version 03__06-2008_EN.pdf - 第4页
1 - 2 S tudent Gu ide CAN BUS Wor kshop Inhalt E dition 06 /2008 2
Student Guide CAN BUS Workshop
Edition 06/2008 Inhalt
1
0
Chapter
Table of contents
0 Course introduction
SIPLACE CAN BUS Workshop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
0.1 Course Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1 - 2
Student Guide CAN BUS Workshop
Inhalt Edition 06/2008
2
1 - 3
Student Guide CAN BUS Workshop
Edition 06/2008 Course introduction SIPLACE CAN BUS Workshop
3
0 Course introduction
SIPLACE CAN BUS Workshop
Course Objectives:
The participants know the technical changes and can identify the different parts on the machine.
They are able to explain and to recognize the different CAN Bus structure and to check the phys-
ical function of the CAN Bus. They know the new circuit diagram of the One Wire Bus and can
check the function. They are able to check and write Board type ID`s in an EEPROM. The partic-
ipant can do a structured troubleshooting of all this topics.
Course Duration: 2 Days
Class hours: First day:9:00am
Last day:15:00am
Training Location:
In any SIPLACE Training Centers equipped with a SIPLACE X/HF/HS
Prerequisites:
FSE Training for SIPLACE X/HF/HS
Field Experience on SIPLACE X/HF/HS
Target Group:
SIPLACE Trainer, Setup Engineer
SIPLACE FSE experts, SCC