CAN Bus Workshop_Version 03__06-2008_EN.pdf - 第119页
CACCIA Manual 1 Caccia Student Guide Issue 04/2007 EN 27 1.4.2 Moving the X and Y Gantry Axes 1 Fig. 1 - 14 Moving the X and Y gantry axes Note The soft ware release can be seen on the SSK (the to p green LED must shine)…
1 Caccia Student Guide CACCIA Manual
Issue 04/2007 EN
26
ATTENTION
The Caccia operator is responsible for the entire machine (Z-axis up pos.; Y park position; multiple
operation)! 1
1
1
Tab. 1 - 7 Tape cutter dialog box functions
1
→ The Axis dialog box allows you to start a query or an axis reference run.
→ The Endurance button opens the Axis Endurance dialog box.
→ The Axis Endurance dialog box allows you to position the axes.
Button Description / Action
Gantry Opens the gantry to be moved. Gantry 4 is opened in the example.
Axis VHS Opens the axis to be moved (e.g. main axis with C&P20 head).
X-Axis
Allows you to select the axis required with a doubleclick. The X-axis
is selected in the example. The Axis dialog box will open.
CACCIA Manual 1 Caccia Student Guide
Issue 04/2007 EN
27
1.4.2 Moving the X and Y Gantry Axes
1
Fig. 1 - 14 Moving the X and Y gantry axes
Note
The software release can be seen on the SSK (the top green LED must shine). 1
1
Nominal axis position
State
PD Positioning data
FP Travel profile data
SW Software enabled
MD Machine data
SRV Servo active (green)
REF Reference run
Buttons with numbers are reserved.
Actual axis position
Shows the actual AC
Firmware
Handshake
Err Error
POS Position deviation
END End message
DAN Data IN
Buttons with numbers are reserved.
1 Caccia Student Guide CACCIA Manual
Issue 04/2007 EN
28
1
Fig. 1 - 15 Moving the X and Y gantry axes
Starts the reference run
Issues a new status request for the
subsystem. If you wish to continuously
update the status request, place a tick
next to the Query button .
Cancels the function currently started
Acknowledges errors
Grafical axis trace
display (Developer)
Starts an external program
(Developer)
Command dialog box (Developer)
Axis Performance Protocol
dialog box (Developer)
Axis Trace (Developer)
Axis Endurance Test dialog box
Download
Load machine data (Developer)
Selects the travel profile