CAN Bus Workshop_Version 03__06-2008_EN.pdf - 第5页
1 - 3 S tude nt Guide C AN BUS Wor kshop Editio n 06/200 8 Course introd uction S IPLACE C AN BUS W orkshop 3 0 Course introduction SIPLACE CAN BUS W orkshop Course O bjectives: The participants kno w the tech nical ch a…
1 - 2
Student Guide CAN BUS Workshop
Inhalt Edition 06/2008
2
1 - 3
Student Guide CAN BUS Workshop
Edition 06/2008 Course introduction SIPLACE CAN BUS Workshop
3
0 Course introduction
SIPLACE CAN BUS Workshop
Course Objectives:
The participants know the technical changes and can identify the different parts on the machine.
They are able to explain and to recognize the different CAN Bus structure and to check the phys-
ical function of the CAN Bus. They know the new circuit diagram of the One Wire Bus and can
check the function. They are able to check and write Board type ID`s in an EEPROM. The partic-
ipant can do a structured troubleshooting of all this topics.
Course Duration: 2 Days
Class hours: First day:9:00am
Last day:15:00am
Training Location:
In any SIPLACE Training Centers equipped with a SIPLACE X/HF/HS
Prerequisites:
FSE Training for SIPLACE X/HF/HS
Field Experience on SIPLACE X/HF/HS
Target Group:
SIPLACE Trainer, Setup Engineer
SIPLACE FSE experts, SCC
1 - 4
Student Guide CAN BUS Workshop
Course introduction SIPLACE CAN BUS Workshop Edition 06/2008
4
0.1 Course Contents
Introduction:
General Introduction
Curriculum of the course
SIPLACE Safety Consideration:
General Safety
Machine safety
ESD guide lines
Safety Circuit
CAN BUS SIPLACE
History of the CAN Bus HF/HF3
CAN BUS SIPLACE X
Physical inspection
Introduction CAN Test Box
Measurement of the CAN Bus Termination and voltage levels
Monitoring CAN Telegrams
Troubleshooting CAN Bus
CAN Commands and ID`s
Error frames and public bytes
CAN Bus Information via the Bug Report
Firmware on the COM Board
Axis reference run without MC
Addressing and jumper assignment on SIPLACE X