CAN Bus Workshop_Version 03__06-2008_EN.pdf - 第15页

1 - 7 S tudent Guide CAN BUS W orkshop Edition 06/2 008 1 Operat ional safety 7 1.2.1.6 W arning label W206 1.2.1.7 W arning label W207 on the axis unit Fig. 1.2 - 3 Warning label W207 o n the axis unit M acrolon panel 1…

100%1 / 298
1 - 6
Student Guide CAN BUS Workshop
1 Operational safety Edition 06/2008
6
1.2.1.5 Warning label W205 on the tape cutter
Fig. 1.2 - 2 Warning label W205 on the bottom of the tape cutter
WARNING 1
If you wish to do work on the tape cutter, you must disconnect the machine from the mains sup-
ply and the compressed air supply.
Wait until the operating pressure has dropped to 0 MPa.
RISK OF CUTTING!
Danger of cutting is present even when the
machine is switched off
1 - 7
Student Guide CAN BUS Workshop
Edition 06/2008 1 Operational safety
7
1.2.1.6 Warning label W206
1.2.1.7 Warning label W207 on the axis unit
Fig. 1.2 - 3 Warning label W207 on the axis unit Macrolon panel
1.2.1.8 Warning label "laser class 2" on the PCB conveyor
Fig. 1.2 - 4 Warning label "Laser class 2" on the PCB conveyor
DANGEROUS VOLTAGES!
The labeled parts are still live when the main power switch is off.
Disconnect the machine from the mains before servicing it.
NAFTA region: RISK OF ELECTRIC SHOCK OR BURN!
MAIN POWER VOLTAGE!
Switch off the main power switch and wait 30 seconds until the
capacitors have discharged.
NAFTA region: RISK OF ELECTRIC SHOCK OR BURN!
LASER RADIATION!
Do not look into beam
Laser class 2
1 - 8
Student Guide CAN BUS Workshop
1 Operational safety Edition 06/2008
8
1.2.2 Safety instructions for manually moving the Z axis at the TwinHead
CAUTION RISK OF CRUSHING AT THE TWINHEAD 1
NEVER move the Z axis down with your hand at the buffer of the return unit. The powerful spring
force of the cylinder creates a risk of injury to your fingers due to the buffer springing back. The
same applies inside the TwinHead when the piston rod springs back into its starting position.
Fig. 1.2 - 5 Risk of crushing from the return unit on the TwinHead
1. Return unit, compressed air cylinder
2. Piston rod
3. Buffer of the return unit
(A)Risk of crushing to fingers