CAN Bus Workshop_Version 03__06-2008_EN.pdf - 第199页

CACCIA Manual 1 Caccia Student Guide Issue 04/2007 EN 107 1.12.4.1 Error messages TQM Modul The error messages appea rs on the 7 segment display a nd in Caccia, with the SW 601.02 on the station, too. Error messages TQM …

100%1 / 298
1 Caccia Student Guide CACCIA Manual
Issue 04/2007 EN
106
When the TQM module on the head interface, so you can use the command 36, if the TQM mo-
dule directly on the twin head (main board, C600) so you have to use the command 22.
EEPROM write:
( e.g.Gantry 1 CAN ID 300 with C&P20)
CAN ID: 300 Command: B3 31 00 12 01 write headinterface ID 01
CAN ID: 301 Acknowledge: B3 00
CAN ID: 300 Command: B3 32 00 12 22 write headadapter ID 22
CAN ID: 301 Acknowledge: B3 00
CAN ID: 300 Command: B3 33 00 12 30 write intermediate distributor ID 30
CAN ID: 301 Acknowledge: B3 00
CAN ID: 300 Command: B3 35 00 12 31 write vacuumsensor holding circuit ID 31
CAN ID: 301 Acknowledge: B3 00
e.g. Gantry 1 Vision Board:
CAN ID: 180 Command: B3 11 00 12 11 write Vision Board ID 11
CAN ID: 181 Acknowledge: B3 00
e.g. Gantry 3 Vision Board stationary:
CAN ID: 150 Command: B3 11 00 12 12 write Vision Board stationary ID 12
CAN ID: 151 Acknowledge: B3 00
CACCIA Manual 1 Caccia Student Guide
Issue 04/2007 EN
107
1.12.4.1 Error messages TQM Modul
The error messages appears on the 7 segment display and in Caccia, with the SW 601.02 on the
station, too.
Error messages TQM Modul
E = Error
Description
E A0 (generell)
No HW found with the correct ID ( Vision, C600, C500,
Adapter oder Zwischenverteiler)
E 0b (generell)
actual application not correct to the nominal application
(Vision board, C600, C500, Adapter or intermediate distri-
butor) --> Download the correct application.
E 10 (Vision environment)
No Vision Board ID
E 11 (Vision environment)
EEPROM Data not plausible
E 12 (Vision environment)
EEPROM not available
E 20 (Twin Head environment)
No Twin Head HW found
E 61 (Twin Head environment)
EEPROM Data not plausible
E 62 (Twin Head environment)
EEPROM not available
E 68 (Twin Head environment)
Head Interface(C500) TQM Modul available --> remove the
TQM or set to RESET.
E 30 (C500 Head interface environment)
No C500 PCB found (HW)
E 50 (C500 Head interface environment)
more than one EEPROM‘s not available
E 51 (C500 Head interface environment)
EEPROM Data not plausible ( board type recognition data
Adapter and Intermediate distributor not conform)
E 52 (C500 Head interface environment)
board type recognition head interface (C500) not correct
E 53 (C500 Head interface environment)
board type recognition head adapter not correct
E 54 (C500 Head interface environment)
board type recognition intermediate distributor not correct
E 55 (C500 Head interface environment)
EEPROM not available headinterface (C500)
E 56 (C500 Head interface environment)
EEPROM not available head adapter
E 57 (C500 Head interface environment)
EEPROM not available or TQM on headinterface (C500)
not available
1 Caccia Student Guide CACCIA Manual
Issue 04/2007 EN
108
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
E 58 (C500 Head interface environment)
8 bit Procssor on headadapter available or remove the 8
bit processor
E 59 (C500 Head interface environment)
board type recognition head interface and head adapter are
not conform --> programming the correct board type.
E 5A (C500 Head interface environment)
unknown head adapter --> programming the correct board
type.
E 5b (C500 Head interface environment)
unknown head interface and head adapter --> program-
ming the correct board type.
E 5C (C500 Head interface environment)
unknown head interface --> programming the correct board
type.
E 5d (C500 Head interface environment)
unknown intermediate distributor --> programming the cor-
rect board type.
E 5E (C500 Head interface environment)
unknown Head adapter and intermediate distributor -->
programming the correct board type.
E 5F (C500 Head interface environment)
unknown head adapter- and intermediate distributor
eeprom.
Error messages TQM Modul
E = Error
Description