CAN Bus Workshop_Version 03__06-2008_EN.pdf - 第144页
1 Caccia Student Guide CACCIA Manual Issue 04/2007 EN 52 1.6.5 T win Head Firmware Download → Click on the button to open the Subsyste m Control Center dial og box: 1 Fig. 1 - 28 T win head firmware download For X or HF …
CACCIA Manual 1 Caccia Student Guide
Issue 04/2007 EN
51
Tab. 1 - 20 BIOS Application 1/2 examples on A363 Axis controller
Free 03.02.00 03.FB.69 03.02.23
Axis type
BIOS version
system boot data
Application 1
firmware for axis
main board
Application 2
firmware for VC3
controller
1 Caccia Student Guide CACCIA Manual
Issue 04/2007 EN
52
1.6.5 Twin Head Firmware Download
→ Click on the button to open the Subsystem Control Center dialog box:
1
Fig. 1 - 28 Twin head firmware download
For X or HF series machines:
Determine whether the selected machine operates with a twin head or with one or two TQM mod-
ule processors. Only select one segment for the download. The same applies when using SITEST.1
When performing a firmware (eSW) download, only select one segment (1 or 2) and then continue
the download as usual. 1
If both segments are selected, you will not be able to perform the download with a firmware i.e.
the 2nd address can not be addressed. 1
1
CACCIA Manual 1 Caccia Student Guide
Issue 04/2007 EN
53
1.6.6 Twin Head
→ Click on the button to open the Subsystem Control Center dialog box:
1
Fig. 1 - 29 Twin head
1.6.7 Bootstrap Loader A364
1.6.7.1 In General
Also for the new axis card A364 it is possible to execute a BIOS download via V24 interface
(R232) - just as for the former axis cards A362 and A362.
Contrary to the former version the program Bootstrap Loader is integrated in CACCIA and by
means of the adapter card a download can be executed.
CACCIA can be used to record the vacuum values at both TWIN
head segments.
The two TWIN head segments are controlled by the head processor
on the head board. The EPROM query for the 16-bit processor is
also initiated here.