00191413-01.pdf - 第163页
User Manual Line Computer UNIX 4 Data Management Software Version 501.xx 01/99 Issue 4.6 CAD Import 4 - 53 4.6.3. 2 E diting a Fil ter Alloca tion of th e data from the CAD file t o the positi on fields in the "PC B…
4 Data Management User Manual Line Computer UNIX
4.6 CAD Import Software Version 501.xx 01/99 Issue
4 - 52
- Processing type
At this point, you can globally specify for all components contained in the CAD the type of processing
that is to apply.
● Click on the button in the "Processing type" editing field and hold down the mouse button.
A popup menu containing a list of the possible processing types opens.
● Position the mouse cursor on the entry of the desired processing type and release the mouse
button.
The menu closes and the name of the selected processing type is displayed in the "Processing
type" selection field.
- Coordinate system
In this selection field the different coordinate systems are symbolized by icons. They can be used to
set the position of the coordinate system of the CAD data in relation to the coordinate system of the
machine, with respect to the direction of PCB travel.
The first four icons (coordinate systems) refer to the normal position of all placement positions, i.e. the
assembly of the top side of the PCB.
The remaining four icons (coordinate systems) are required in case the CAD data are mirrored (coor-
dinate system in counterclockwise direction). This is the case, for instance, if the placement positions
on the bottom side of the PCB were described on the basis of the coordinate system of the top side of
the PCB. If coordinate systems are mirrored (- 0°, - 90°, -180° or - 270°) all angles of the placement
positions will be rotated by 180°.
● Click on the icon representing the coordinate system to be set.
Local data
In the Local data the actual structure of the CAD data is described by assigning data fields to position fields.
Each position field whose name is preceded by an asterisk * must be assigned a data field. Any allocation to
the "PP comment" position field is optional.
- * Co.name
This position field is assigned the component name from the CAD file.
- * PP X-val.
This position field is assigned the x-coordinate of the placement position from the CAD file.
- * PP Y-val.
This position field is assigned the y-coordinate of the placement position from the CAD file.
- * PP angle
This position field is assigned the rotational angle of the placement position from the CAD file.
- PP comment
This position field can be assigned the comment relating to the placement position form the CAD file.
User Manual Line Computer UNIX 4 Data Management
Software Version 501.xx 01/99 Issue 4.6 CAD Import
4 - 53
4.6.3.2 Editing a Filter
Allocation of the data from the CAD file to the position fields in the "PCB filter dialog
"
window is accomplished
by two successively performed single clicks. First the source (data field) is to be clicked on and then the
destination (position field). Other clicking sequences do not result in allocations.
For the allocation, a data field can be selected from any data line desired. All data fields that are then to be
allocated must be located on this selected data line, otherwise the data will not be accepted in the respective
position fields. Allocations can be deleted by clicking on the individual position fields with the right
mouse button.
Procedure:
● From the "PCB filter dialog" window select the "Field separator“ corresponding to the CAD data
(for details see page 4 - 51).
● All other desired filter settings are to be performed in accordance with the structure of the CAD file
(for details see page 4 - 50).
● In the "PCB type" editing field enter a name for the PCB type (for details see page 4 - 51).
● Select the processing type and the coordinate system (for details see page 4 - 52).
● Click on a data field (source) on any data line desired contained in the main window of CAD
Import. The data field is highlighted.
● Click on the appropriate position field (destination) in the "PCB filter dialog" window.
The contents of the data field are transferred to the position field.
No plausibility check will be performed.
● All position fields are to be allocated the corresponding data fields in the same way.
NOTE
The data of an already-allocated data field are displayed underlined in the main window of CAD
Import.
● Click on OK for the filter data to be accepted.
The filter is saved under the current name, and the "PCB filter dialog" window closes.
4 Data Management User Manual Line Computer UNIX
4.6 CAD Import Software Version 501.xx 01/99 Issue
4 - 54