00191413-01.pdf - 第318页
10 Production Tools / Restrictions User Manual Line Computer UNIX 10.1 Restriction Editor Software Version 501.xx 01/99 Issue 10 - 12 10.1.3.4 Ter minating the Restriction Editor S ession ● Selec t the menu option FIL E …
User Manual Line Computer UNIX 10 Production Tools / Restrictions
Software Version 501.xx 01/99 Issue 10.1 Restriction Editor
10 - 11
In the selection field "Restrictions/Allocations" the name of the machine type on which the current
component must not
be set up is displayed, preceded by the letter "E". If a particular feeder part was
selected, the side on which the feeder part is located is entered in addition.
Example: A S_SIP_80F R
Machine type Side
(SIPLACE 80F) ("right" as seen in the direction of travel)
NOTE
If in the selection field "Restrictions/Allocations" a side ("R" or "L") is entered in addition to the name
of the machine type, the exclusion applies to this side only (feeder part) and not the entire machine
type.
An exclusion can be reversed again by clicking on a location highlighted in red.
- (Delete)
When this icon is active, the editor is in the deletion mode. Entries of bindings, exclusions or allocati-
ons selected in the selection field "Restrictions/Allocations" are deleted. Moreover, the customer-spe-
cific types created in the Restriction Editor can be deleted in the selection field "Placeable feeders".
● Click on icon in the command area.
● Select the restriction or allocation you want to delete from the selection field "Restrictions/Alloca-
tions" or select the "customer-specific type" from the selection field "Placeable feeders". The
selected entry is deleted from the selection field.
Saving the defined allocations, bindings and exclusions
● Select menu option FILE --> Save.
The current data are saved to the ".rs" restriction file of Job data/Losplanung.
10 Production Tools / Restrictions User Manual Line Computer UNIX
10.1 Restriction Editor Software Version 501.xx 01/99 Issue
10 - 12
10.1.3.4 Terminating the Restriction Editor Session
● Select the menu option FILE -->Quit.
The main window of the Restriction Editor is closed.
NOTE
If modified data have not been saved yet, a warning message is displayed in a dialog box which must
be acknowledged (see chapt. 2, chapt. 2.5).
● Click on Yes to save the data prior to exiting the editor.
The Restriction Editor is closed and the modified data are automatically saved.
● Click on No if the modified data are not to be saved.
The Restriction Editor is closed without the modified data being saved.
User Manual Line Computer UNIX
Software Version 501.xx 01/99 Issue
11 - I
Contents
Page
Production Tools / Optimization
11.1 Fundamental Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 1
11.1.1 Functionality Extension. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 3
11.2 Concept Used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 4
11.3 Setup Optimization. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 6
11.3.1 Prerequisites for Setup Optimization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 6
11.3.2 Data access during optimization run . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 6
11.3.2.1 Starting the Optimization Run. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 7
11.3.3 Functions of the Setup Optimization. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 8
11.3.3.1 Control of the Setup Optimization by the Operator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 8
11.3.3.2 Fixed Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 9
11.3.3.3 Initial Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 9
11.3.3.4 Station Setup by Setup Optimization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 10
11.3.3.5 Machine Restrictions Taken Into Account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 12
11.3.3.6 Capacities Taken Into Account For Setup Optimization. . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 13
11.3.3.7 Inclusion of Feeders in Clustering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 13
11.3.3.8 Inclusion of Changeover Tables in Clustering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 14
11.3.3.9 Inclusion of a Basic Time in Clustering. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 14
11.3.3.10 Handling of Dominant Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 14
11.3.3.11 Handling of Dominant Vibration Times. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 15
11.3.3.12 Nozzle Minimization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 15
11.3.3.13 Times Taken Into Account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 15
11.3.4 Errors During Optimization Run . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 17
11.4 Optimization Dialog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 19
11.4.1 Starting the Optimization Dialog. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 19
11.4.2 Main Window of Optimization Dialog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 20
11.4.3 SERVICES Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 23
11.4.3.1 Changing Standard Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 23
11.4.3.2 Examples of Parameter Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 28
11.4.3.3 Changing Job Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 30
11.4.3.4 Discarding Job Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 30
11.4.3.5 Viewing the Error File. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 31
11.4.3.6 Starting the Feeder Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 31
11.4.3.7 Starting the Restriction Editor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 31
11.4.3.8 Checking for Producibility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 31
11.4.3.9 Displaying the Set-Up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 32
11.4.3.10 Displaying Result File. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 32
11.4.4 Command Area „Actions“. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 33
11.4.5 Command Area „Edit“. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 37