00191413-01.pdf - 第164页
4 Data Management User Manu al Line Computer UNIX 4.6 CAD Import S oftware Version 501.xx 01/99 Issue 4 - 54
User Manual Line Computer UNIX 4 Data Management
Software Version 501.xx 01/99 Issue 4.6 CAD Import
4 - 53
4.6.3.2 Editing a Filter
Allocation of the data from the CAD file to the position fields in the "PCB filter dialog
"
window is accomplished
by two successively performed single clicks. First the source (data field) is to be clicked on and then the
destination (position field). Other clicking sequences do not result in allocations.
For the allocation, a data field can be selected from any data line desired. All data fields that are then to be
allocated must be located on this selected data line, otherwise the data will not be accepted in the respective
position fields. Allocations can be deleted by clicking on the individual position fields with the right
mouse button.
Procedure:
● From the "PCB filter dialog" window select the "Field separator“ corresponding to the CAD data
(for details see page 4 - 51).
● All other desired filter settings are to be performed in accordance with the structure of the CAD file
(for details see page 4 - 50).
● In the "PCB type" editing field enter a name for the PCB type (for details see page 4 - 51).
● Select the processing type and the coordinate system (for details see page 4 - 52).
● Click on a data field (source) on any data line desired contained in the main window of CAD
Import. The data field is highlighted.
● Click on the appropriate position field (destination) in the "PCB filter dialog" window.
The contents of the data field are transferred to the position field.
No plausibility check will be performed.
● All position fields are to be allocated the corresponding data fields in the same way.
NOTE
The data of an already-allocated data field are displayed underlined in the main window of CAD
Import.
● Click on OK for the filter data to be accepted.
The filter is saved under the current name, and the "PCB filter dialog" window closes.
4 Data Management User Manual Line Computer UNIX
4.6 CAD Import Software Version 501.xx 01/99 Issue
4 - 54
User Manual Line Computer UNIX
Software Version 501.xx 01/99 Issue
5 - I
Contents
Page
Product / Component
5.1 Component Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 - 1
5.1.1 Starting the Component Editor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 - 1
5.1.2 Main Window of Component Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 2
5.1.2.1 SERVICES menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 - 4
5.1.2.2 Component Editor Selection Fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 - 5
5.1.2.3 Component Editor Editing Fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 - 7
5.1.2.4 Component Editor Command Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 - 8