00191413-01.pdf - 第419页
User Manual Line Computer UNIX 13 Production Tools / Set-Up Software Version 501.xx 01/99 Issue 13.1 Set-Up Editor (Feeder Part and WPC Editors) 13 - 21 Menu Bar The menu ba r contai ns the menus "FI LE", "…
13 Production Tools / Set-Up User Manual Line Computer UNIX
13.1 Set-Up Editor (Feeder Part and WPC Editors) Software Version 501.xx 01/99 Issue
13 - 20
13.1.3.5 Packaging Editor for Waffle-Pack Trays
The waffle-pack trays are defined in the Packaging Editor. It must be opened separately for each individual
waffle-pack tray.
The number of the divisions in X and Y-directions are defined in the Packaging Editor. Moreover, the coordinates,
the pick-up angle and the diagonal for a given component are stated (see Fig. 13.1.14).
Fig. 13.1.14 Packaging Editor for Waffle-Pack Trays
The Packaging Editor for waffle-pack trays is subdivided into the following areas:
-
Menu bar
-
Identification field
-
Editing area
editin
g
area
menu bar
identification field
User Manual Line Computer UNIX 13 Production Tools / Set-Up
Software Version 501.xx 01/99 Issue 13.1 Set-Up Editor (Feeder Part and WPC Editors)
13 - 21
Menu Bar
The menu bar contains the menus "FILE", "EDIT" and "HELP".
NOTE
The functions and the operation of the menus "FILE" and "HELP" are similar to those in other application
programs of the line computer and are described in detail in chapt. 2 "General Information on Using the
Program".
EDIT
Menu
The EDIT menu contains the following options:
-
Reset data
The corrections are deleted from all editing fields. The factory-set default values are redisplayed.
-
Delete comp.
The component is deleted from the feeder division. This is indicated by a minus sign in the identifica-
tion field.
Identification Field
The identification field contains the following data which cannot be edited:
-
Station:
Name of the current station including "Anlagen/line/subline/set-up/
station name"
-
Location:
Designation of the current waffle-pack tray carriers
-
Track:
Number of the track or level on which the waffle-pack tray carrier is set up
with the selected waffle-pack tray
-
Mach. opt:
Waffle-pack tray with information on the number of the divisions in X and
Y-directions (e.g. 1x1) and the components set up therein. A minus sign
signifies that no component has been defined.
-
Div.:
No entry
Editing Area
Corrections are entered in the editing area which are required for the accurate removal of the components.
When the Packaging Editor is opened, the factory-set default values or the values that were entered most
recently for a given component, are displayed in the editing fields.
The values in the editing area can be changed by clicking on the individual editing fields. The values are accepted
by pressing the Enter key after each correction made.
If the entries are not to be accepted, it is possible to reset the values on the EDIT menu to the default values
using the "Reset data" option.
13 Production Tools / Set-Up User Manual Line Computer UNIX
13.1 Set-Up Editor (Feeder Part and WPC Editors) Software Version 501.xx 01/99 Issue
13 - 22
-
Divisions in X
Number of divisions in x-direction (default value: 1)
-
Divisions in Y
Number of divisions in y-direction (default value: 1)
-
First div. X [mm]
Offset from the zero point of the waffle-pack tray carrier to the center of the first division in x-direction
(default value: 0.000). See Fig. 13.1.15.
-
First div. Y [mm]
Offset from the zero point of the waffle-pack tray carrier to the center of the first division in y-direction
(default value: 0.000). See Fig. 13.1.15.
Fig. 13.1.15 X-Offset and Y-Offset to the First Division
-
Z [mm]
Pick-up height: Offset in Z-direction from the support surface of the waffle-pack tray in the waffle-pack
tray carrier to the bottom surface of the compartment of the waffle-pack tray (default value: 0.000).
Siehe Fig. 13.1.16.
division of the
waffle-pack tra
y
waffle-pack
tra
y
carrier
first division
X
[
mm
]
zero point of the
waffle-pack tra
y
first division
Y
[
mm
]
center of
first division
waffle-pack tra
y