00191413-01.pdf - 第85页
User Manual Line Computer UNIX 3 Desktop (Root Window) Software Version 501.xx 01/99 Issue 3.2 Desktop User Interface 3 - 15 NOTE Packag e forms are c onsidered to be similar if they are o f the same pac kage fo rm type …
3 Desktop (Root Window) User Manual Line Computer UNIX
3.2 Desktop User Interface Software Version 501.xx 01/99 Issue
3 - 14
- GF Handling
This menu item combines the menu options "Install GF-Bibliothek", "Conversion of GF-Bibliothek",
“Replace GF number" and "Similarity check".
- Install GF-Bibliothek
This menu option enables you to install a new GF library into the "Master data" directory from
diskette. When so doing, all standard package forms (range 1 ... 1499) already contained in the
"Master data/GF-Bibliothek" library will be replaced.
● Click on OPTIONS --> Install GF-Bibliothek.
The following dialog box opens.
Settings to choose from prior to installing the new GF library
Line configuration
- Only SIPLACE machines
The Only SIPLACE machines button is activated by default. This setting is to be maintained if the
active line comprises exclusively SIPLACE machines.
If the line consists of one or more HS-180 machines, the Only SIPLACE machines button needs to
be deactivated.
Options
- Maintain handling data
If this button is activated, only
the vision data of the standard package forms will be overwritten.
If the button is deactivated (default setting), both the vision and
the handling data of the standard
package forms will be overwritten
- Search for similar package forms
If this button is activated, all customer-specific package forms (GF no.
>
1500) will automatically be com-
pared for similarity with the new standard package forms after the new GF library has been installed.
If the button is deactivated, (default setting), no similarity comparison will be carried out.
Settings area
User Manual Line Computer UNIX 3 Desktop (Root Window)
Software Version 501.xx 01/99 Issue 3.2 Desktop User Interface
3 - 15
NOTE
Package forms are considered to be similar if they are of the same package form type (PDC, FDC or
BGA) and, in addition, if the following criteria are met:
- PDC / FDC / BGA same length and width of the component, including the tolerance
- FDC / BGA same number of pins or "balls"
- FDC / BGA same number of lead or ball models
Procedure:
● Insert the diskette containing the new GF library into the floppy drive.
● If required, activate/deactivate the appropriate buttons in the settings area of the dialog window.
● Click on OK.
The following dialog box opens.
NOTE
The texts displayed in the dialog box vary according to the selected settings.
● Click on No or Abort if there are still settings to be changed.
● Click on Yes if the installation process is to be started based on the settings displayed. A
message is displayed in the dialog box informing you that the diskette is being read.
● Click on Abort when a message is displayed in the dialog box informing you that the GF library
has been installed.
The dialog box closes.
Use the Report button in the dialog box to obtain a display of the installation results and of any similarity
comparison that may have been performed.
● Click on Report in the dialog box.
The File Display main window opens. The contents of the "GF_LibInstall.log" log file are dis-
played in the view area.
3 Desktop (Root Window) User Manual Line Computer UNIX
3.2 Desktop User Interface Software Version 501.xx 01/99 Issue
3 - 16
● Close the File Display main window by selecting the FILE --> Quit menu option.
● Click on Cancel in the dialog box.
The dialog box closes.
● Remove the diskette from the floppy drive.
- Conversion of GF-Bibliothek (Package Form Library)
This menu option serves to either check the entire GF-Bibliothek for any entries that may have to be
changed, or to supplement the standard SIEMENS library range and/or the entire GF-Bibliothek by
adding the entries for the standard configurations of nozzle and sensor system types.
NOTE
Individual GF-files can be converted with the aid of the Data Manager (see chapt. 4,
section 4.3.4.5)
● Click on OPTIONS --> GF-Handling --> Convert GF-Bibliothek.
The dialog box shown below opens.
Selection Options
- Check only
This option serves to check the entire GF-Bibliothek. During this check it is determined which entries
relating to standard configurations of nozzle and sensor system types have to be changed in the
respective GF-files.
The result of the check is entered in the "GF-Convert.log" file and can be viewed using the file display
function (see page 3 - 17).