00191413-01.pdf - 第280页
8 Product / PCB User Manual Line Computer UNIX 8.1 PCB Editor Software Version 501.xx 01/99 Issue 8 - 42 - Search/replace in part. placement progr. Searchin g/replac ing is p erforme d through out the cur rent placem ent…
User Manual Line Computer UNIX 8 Product / PCB
Software Version 501.xx 01/99 Issue 8.1 PCB Editor
8 - 41
8.1.6.4 Command Area of Placement Position Editor
- Check PP data
If you click on this icon following the editing of the PP data, all data entered in the editing area will be
checked for correctness (e.g. number of positions before and after the comma, number of characters,
etc.) and arranged in the various columns provided.
- Search/Replace
This button serves to open the window for the entry of search or replacement texts. In the editing fields
of this window any character strings desired can be entered which will subsequently be searched for
or replaced, respectively.
● Click on the in the command area.
The search window for the entry of a search or replacement text is opened.
Fig. 8.1.12 Search Window "Placement Position Editor"
Setting area
The conditions for the search or replacement operation are defined in the setting area with the aid of various
buttons.
Setting possibilities for the search/replacement operations within the given text:
- Search/replace from cursor position downward Searching/replacing is performed within
the current placement program from the
cursor position in downward direction
- Search/replace from cursor position upward Searching/replacing is performed within
the current placement program from the
cursor position in upward direction
editing fields
command area
setting area
8 Product / PCB User Manual Line Computer UNIX
8.1 PCB Editor Software Version 501.xx 01/99 Issue
8 - 42
- Search/replace in part. placement progr. Searching/replacing is performed throughout
the current placement program (editing area)
Setting possibilities for the replacement operation:
- Replace with confirm. Every time an occurrence of the search
text within the searched area is replaced
with a replacement text, this must be con-
firmed by clicking on the "Replace" button in
the command area of the search window.
- Replace w/out confirm. All occurrences of the search text found in
the searched area are replaced with the
replacement text without prior confirmation
when the "Replace" button is clicked on.
NOTE
By default, the buttons "Search/replace from cursor position downward" and "Replace with confirm."
are activated.
Procedures to be followed for the searching and replacing of character strings
● In the setting area, activate the buttons representing the desired conditions for the searching and
replacing operation (see Fig. 8.1.12).
● Enter the character string to be searched for in the "Search t:" editing field.
● Enter new character string in the "Repl. text:" editing field if the character string entered in the
"Search t:" editing field is to be replaced.
● Click on the Search button in the command area.
The first occurrence of the character strings searched for appears darkened in the editing area of
the Placement Position Editor window. Clicking on the button again, causes the subsequent
occurrence of the character string within the given search area to be highlighted.
● Click on the Replace button in the command area.
If "Replace with confirm." has been set, the highlighted character string is replaced with the cha-
racter string entered in the "Repl. text:" editing field and subsequently the next occurrence of this
character string is highlighted.
If "Replace w/out confirm." has been set, the first occurrence of the character string within the
defined text portion to be searched and all
further identical character strings found within this
searched area are replaced with the character string entered in the "Repl. text:" editing field. Sub-
sequently an information box is displayed informing you of the number of replacements made.
NOTE
To speed up the searching and replacing operations, the procedure described below can be used.
After entering the search and, if applicable, replacement text, move the mouse pointer to the desired
position within the editing area of the search window.
User Manual Line Computer UNIX 8 Product / PCB
Software Version 501.xx 01/99 Issue 8.1 PCB Editor
8 - 43
● To search from the cursor position downward:Press the CTRL Ç keys simultaneously
● To search from the cursor position upward:Press the CTRL Æ keys simultaneously
● Replacing the found character string:Press the CTRL ↵ keys simultaneously.
● When the searching/replacing operation is completed, click on Cancel to terminate the search
window. The search window is closed.
- Sort
This function serves to sort the placement position data in accordance with the level numbers, if
available.
● Click on the icon in the command area.
The PP data is sorted by the level numbers. Sorting is performed in ascending order (see Fig.
8.1.11).