00191413-01.pdf - 第83页
User Manual Line Computer UNIX 3 Desktop (Root Window) Software Version 501.xx 01/99 Issue 3.2 Desktop User Interface 3 - 13 The window c loses a nd the foll owing info box o pens. ● Close the in fo box by clic king on O…
3 Desktop (Root Window) User Manual Line Computer UNIX
3.2 Desktop User Interface Software Version 501.xx 01/99 Issue
3 - 12
- Change network configuration
This menu option is designed to directly start the "Network Configuration Manager" program for the
configuration of the network. This option therefore requires special caution to be exercised. Before
starting the program, the operator should already know which options to select for the correct configu-
ration.
Mainly the "Network Configuration Manager" is used for the configuration of the LAN link (output of
LAN card).
● Click on OPTIONS --> Network --> Change network configuration.
The UNIX window "Change network configuration" opens and above it the main window of the "Net-
work Configuration Manager". The current network configuration is displayed graphically in the
view area (see figure below).
Changes in the network configuration can be carried out by selecting the appropriate network component
from the view area and by using the menu options.
The procedure to be followed for the configuration of the LAN link is described in the example below.
● In the view area, click on the entry of the desired LAN card (see figure above).
The entry is darkened.
● From the Hardware menu select the Modify hardware configuration menu option.
The window for setting the LAN link opens.
● Use the appropriate arrows to configure the desired link (and cable type), the I/O address and the
interrupt.
● Click on OK to confirm the settings.
LAN card
entry
Pfeiltaste
User Manual Line Computer UNIX 3 Desktop (Root Window)
Software Version 501.xx 01/99 Issue 3.2 Desktop User Interface
3 - 13
The window closes and the following info box opens.
● Close the info box by clicking on OK. The following dialog box is displayed.
● Close the dialog box by clicking on OK.
NOTE
The View hardware configuration menu option on the Hardware menu allows the current hardware
configuration of the selected LAN card to be displayed.
● To exit from the "Network Configuration Manager" click on HARDWARE --> Exit.
The following dialog box opens.
● Acknowledge the verification query by clicking on Yes.
The dialog box opens closes, and the UNIX window "Unix kernel relink" opens.
● Respond to each of the queries "Do you want this kernel to boot by default" and "Do you want the
kernel enviroment rebuilt", that will be displayed after a few minutes, with y and RETURN.
● Close the UNIX window "Unix kernel relink" by pressing RETURN.
● The main window of the "Network Configuration Manager" and the dialog box close.
Only the UNIX window "Change network configuration" remains displayed.
● Exit from the UNIX window by pressing RETURN.
● Shut down the computer system using the Shutdown main menu function and subsequently
reboot the system.
The line computer system will now be started with the new network configuration.
3 Desktop (Root Window) User Manual Line Computer UNIX
3.2 Desktop User Interface Software Version 501.xx 01/99 Issue
3 - 14
- GF Handling
This menu item combines the menu options "Install GF-Bibliothek", "Conversion of GF-Bibliothek",
“Replace GF number" and "Similarity check".
- Install GF-Bibliothek
This menu option enables you to install a new GF library into the "Master data" directory from
diskette. When so doing, all standard package forms (range 1 ... 1499) already contained in the
"Master data/GF-Bibliothek" library will be replaced.
● Click on OPTIONS --> Install GF-Bibliothek.
The following dialog box opens.
Settings to choose from prior to installing the new GF library
Line configuration
- Only SIPLACE machines
The Only SIPLACE machines button is activated by default. This setting is to be maintained if the
active line comprises exclusively SIPLACE machines.
If the line consists of one or more HS-180 machines, the Only SIPLACE machines button needs to
be deactivated.
Options
- Maintain handling data
If this button is activated, only
the vision data of the standard package forms will be overwritten.
If the button is deactivated (default setting), both the vision and
the handling data of the standard
package forms will be overwritten
- Search for similar package forms
If this button is activated, all customer-specific package forms (GF no.
>
1500) will automatically be com-
pared for similarity with the new standard package forms after the new GF library has been installed.
If the button is deactivated, (default setting), no similarity comparison will be carried out.
Settings area