00191413-01.pdf - 第471页
User Manual Line Computer UNIX 14 Control / Control Modules Software Version 501.xx 01/99 Issue 14.3 Station Control lers 14 - 35 14.3.4 Main Display Window of the Station controller The vari ous elem ents of the main di…
14 Control / Control Modules User Manual Line Computer UNIX
14.3 Station Controllers Software Version 501.xx 01/99 Issue
14 - 34
14.3.3 Opening the "Station Controller" User Interface
Every placement station represented in the current line configuration display is provided with an icon labelled
with the "i" symbol (see "Desktop" user interface in chapt. 3, Fig. 3.1.2). Clicking on this symbol causes the
user interface of the respective station controller to be opened.
● Click on the area of the desired station containing the "i" symbol.
The user interface (main window) of the station controller is opened (see Fig. 14.3.1).
The following information on the selected station is provided in this window:
- names of Line and Station
- settings of Barcode and UFO strategies
- lot name, PCB type, number of pieces (PCBs)
- PCB identification number
- setup of station
- current conveyor width setting
- listings of lots and PCBs
NOTE
While the main window of the station controller is open, the data is continuously updated, i.e. all chan-
ges are displayed immediately.
User Manual Line Computer UNIX 14 Control / Control Modules
Software Version 501.xx 01/99 Issue 14.3 Station Controllers
14 - 35
14.3.4 Main Display Window of the Station controller
The various elements of the main display window and their tasks are described in the following.
Fig. 14.3.1 Main Window "Station Controller"
The main display window is subdivided as follows:
- Menu bar
The menu bar contains the menus "FILE" and "HELP".
NOTE
Since the functions and operation of the menus "FILE" and "HELP" are similar to those in other
application programs of the line computer, they described in detail in chapt. 2.
- Display Area
menu bar
listing of the scheduled lots
IEC bus address
logic name
type of station
of station
listing of the currently
processed (scheduled) PCBs
Station number
display area
14 Control / Control Modules User Manual Line Computer UNIX
14.3 Station Controllers Software Version 501.xx 01/99 Issue
14 - 36
14.3.4.1 Display Area
The individual sections of this area contain the following information:
- Anlage: name of the line (incl. pathname)
(e.g. Anlagen/ERP_Test.ak/.ra)
- Station: logic name of the station, IEC bus address and type of station
(e.g. ERP_S_23 < LAN_2, Placem. station >)
- Set-up: set-up name (e.g. SWT_all01.ar)
- Barcode: type of barcode strategy (type and filter)
- UFO-Strategie: type of UFO strategy (e.g. Verificat., Proceed)
- Lot: This area containing a listing of the scheduled lots.
The job currently being processed is identified by an "a"
in the first column..
- PCB: This area containing a listing of the currently processed
(scheduled) PCBs
Identification: If barcode strategy "with barcode" is selected, the barcode no.
is displayed in the "identification" column.
(in the case of barcode strategy "without barcode, the field
remains empty)
- Station message: status of station
(e.g. "Line computer not connected with station yet")