00191413-01.pdf - 第372页
12 Production Tools / Station and Line Confi guration User Manual Line Computer UNIX 12.1 Configuration Edit or Software Version 501.xx 01/99 Issue 12 - 10 12.1.2.5 OPTIONS Me nu - Define the feeder part as a Ch angeover…
User Manual Line Computer UNIX 12 Production Tools / Station and Line Configuration
Software Version 501.xx 01/99 Issue 12.1 Configuration Editor
12 - 9
● Confirm your exiting from the editor by choosing OK if you do not want to save the changes.
● Click on Cancel to perform a save before the editor session ends.
12.1.2.4 SERVICES Menu
- Invoking the Set-up (Feeder Part) Editor for the feeder part of the "station"
● If a command is active in the command area, it is to be deactivated by clicking on it.
● Select feeder part in the display area (see Fig. 12.1.1) with a mouse click.
● Select SERVICES --> Feeder Part Editor.
The window of the Feeder Part Editor is opened (see Fig. 13.1.2).
- Invoking the Feeder Part Editor for the feeder part of the "Waffle-Pack Changer Trolley"
● If a command is active in the command area, it is to be deactivated by clicking on it.
● Click on WPC-Tr in the selection field "Machines" (see Fig. 12.1.1).
The display area changes to display the structure of the WPC trolley.
● Select feeder part in the display area (see Fig. 12.1.2) with a mouse click.
● Select SERVICES --> Feeder Part Editor.
The window of the (Set-Up)Feeder Part Editor "WPC trolley" is opened (see Fig. 13.1.4).
- Invoking the Machine Options Editor
● If a command is active in the command area, it is to be deactivated by clicking on it.
● Select machine option in the display area (see Fig. 12.1.1) with a mouse-click.
● Select SERVICES --> Machine Opt. Editor.
The window of the Machine Options Editor for the selected machine option is opened (see, for
example, Fig. 12.1.4 ).
NOTE
The menu item "Machine Opt. Editor" can only be selected if a machine option was previously
selected for which a machine option editor is available.
Machine option editors are available for the machine options Station, Station Extension, Head and
Nozzle Changer.
12 Production Tools / Station and Line Configuration User Manual Line Computer UNIX
12.1 Configuration Editor Software Version 501.xx 01/99 Issue
12 - 10
12.1.2.5 OPTIONS Menu
- Define the feeder part as a Changeover table
This option is required exclusively for setup clustering (see chapt. 11).
● If a command is active in the command area, deactivate it by clicking on it.
● Select desired feeder part in the view area (see Fig. 12.1.2) by clicking on it.
● Select the OPTIONS --> ° Component changeover table menu option.
The marking (°) preceding the option now changes (
¤).
° means that the option is deactivated. (The feeder part is considered a fixed setup).
¤ means that the option is active. (The feeder part is treated as a changeover table for setup
clustering purposes).
NOTE
The "°Component changeover table" option can only be selected if the selected feeder part can actually
be defined as changeover table.
User Manual Line Computer UNIX 12 Production Tools / Station and Line Configuration
Software Version 501.xx 01/99 Issue 12.1 Configuration Editor
12 - 11
12.1.2.6 Command Area of the Structure Editor
Depending on which command has been selected in the command area (see Fig. 12.1.1), the corresponding
action will be carried out with machine options selected in the selection area.
NOTE
To be able to create new machine options and allocate these to a given location, the rectangle of the machine
option to be created is to be clicked on by double-clicking in the display area (in the structure). This procedure
can be repeated as often as necessary. The thus created machine option(s) will be displayed in the selection
field "Placeable mach. opt." and is/are available for further actions.
If a machine option is clicked on that cannot be created because it is not part of the fixed (unchangeable)
configuration of the machine type loaded, an error message is displayed. It is impossible, for example, to
create a second gantry on an SIPLACE 80F machine, as this machine type does not allow for two gantries.
COMMANDS
The procedures for executing the commands are described in the following.
- Allocating
This command is used to allocate machine options to a location
● Activate Allocate in the command area.
● Select location to which the machine option is to be allocated.
● Click on machine option in the selection field "Placeable mach. opt.".
The machine option is now allocated to the selected location.
NOTE
If a machine option type is allocated to a given location more often than permitted by the preset maxi-
mum number, an error message is displayed.
- Releasing
Machine Options that have been placed at a location can be returned to the selection field of
placeable machine options and are thus available again for selection at any time.
● Activate Release in the command area.
● Select machine option in selection field "Machine Options at location" with a mouse-click.
The selected machine option is returned to the selection field "Placeable mach. opt.".