00191413-01.pdf - 第484页
14 Control / Cont rol Modules User Manual Line Computer UNIX 14.4 Set-Up Modification Generator Software Version 501.xx 01/99 Issue 14 - 48 14.4.4.1 FILE Menu - Saving the c reated fo llow-up set-up. NOTE This menu item …
User Manual Line Computer UNIX 14 Control / Control Modules
Software Version 501.xx 01/99 Issue 14.4 Set-Up Modification Generator
14 - 47
Menu bar
The menu bar contains the menus "FILE", "OPTIONS" and "HELP".
The "FILE" menu is described in section 14.4.4.1.
The "OPTIONS" menu is described in section 14.4.3.1.
NOTE
Since the functions and the operation of the menus "FILE", "OPTIONS" and "HELP" are similar to those in
other application programs of the line computer, they are described comprehensively in chapt. 2.
Status line
The status line displays the subline and station selected from the corresponding selection fields and which the
current set-up applies to.
Message line
The message line always displays the type of set-up and the name of the set-up shown, or, in the case of
changeover instructions, the name of the inital and folllow-up set-ups.
Selection field "Sublines"
In this field the subline is selected that comprises the stations required for a set-up changeover or for which the
display of a given set-up type is desired.
Selection field "Stations"
In this field all stations that are part of the selected line are listed.
From the list a station is selected for which a given set-up type is to be displayed, or for which set-up changeover
instructions are to be generated and displayed.
Command Area
In the command area the set-up type which is to be displayed in the display area can be selected.
It is possible to initiate the generation and display of instructions for the changeover from an initial set-up to a
follow-up set-up.
Moreover, when a changeover request has been received from a station controller, the operator can indicate
whether he has performed the physical set-up changeover on a station or not by clicking on the appropriate
button. Function and execution of the various commands are described in section 14.4.4.2.
Display area
This area serves to display the type of set-up for a selected station that was selected in the command area, or
the changeover instructions generated for this station.
14 Control / Control Modules User Manual Line Computer UNIX
14.4 Set-Up Modification Generator Software Version 501.xx 01/99 Issue
14 - 48
14.4.4.1 FILE Menu
- Saving the created follow-up set-up.
NOTE
This menu item can only be selected if a PCB-specific follow-up set-up has been created by the
Set-Up Modification Generator.
● Click on FILE --> Save.
The data are stored in the master data storage.
- Printing the set-up for the stations selected in the selection area "Stations" (corresponds to the
current display) or the set-up for all stations of the line
● Select FILE --> Print --> Print Station or FILE --> Print --> Print Line.
The data are output to the connected printer.
- Iconifying the Set-Up Modification Generator
NOTE
This menu item cannot
be selected when the Set-Up Modification Generator was opened automati-
cally by a station controller (initiated by a requesting program).
● Select FILE --> Iconify.
The Set-Up Modification Generator is reduced to an icon on the desktop, it is, however, still
active. Upon clicking on the icon, the main window of the Set-Up Modification Generator is
redisplayed.
- Quitting the Set-Up Modification Generator
NOTE
This menu item cannot
be selected when the Set-Up Modification Generator was opened automati-
cally by a station controller (initiated by a requesting program). In this case, when exiting from the
Set-Up Modification Generator, the note on page 14 - 51 is to be observed.
● Select menu item FILE --> Quit.
The main window is closed. The Set-Up Modification Generator is reduced to an icon on the
desktop.
User Manual Line Computer UNIX 14 Control / Control Modules
Software Version 501.xx 01/99 Issue 14.4 Set-Up Modification Generator
14 - 49
14.4.4.2 Command Area
NOTE
The buttons in the command area cannot
be selected if Set-up or PCB-specific part of set-up has been
selected in the selection window.
In the following, the functions of the commands and the procedure for the execution of the commands are
explained with the "Siplace_2" station serving as an example:
- Viewing the initial set-up of the "Siplace_2" station
● From the selection field "Sublines" select the subline containing the desired "Siplace_2" station.
● Select station Siplace_2 from the "Stations" selection field.
● Click on button Initial set-up. The initial set-up for station "Siplace_2" is displayed in the display
area.
Only in cases where the changeover request originated from the station controller or the Data
Manager is this the current set-up, or when the operator has made his selection in the selection
window based on the current set-up.
- Viewing the follow-up set-up for the "Siplace_2" station
● Click on button Follow-up set-up.
The follow-up set-up for the "Siplace_2" station that was initíally selected from the FSB or created
by the Set-Up Modification Generator (see section 14.4.3.2) displayed.
- Viewing the Target set-up for a station
● Click on button Target set-up.
The target set-up for the "Siplace_2" station initially selected from the FSB (see section 14.4.3.2)
is displayed.
NOTE
The button Target set-up" can only be selected when Current set-up --> PCB-specific set-up or
Set-up --> PCB-specific set-up has been selected from the selection window, i.e. changeover
instructions for the production of a specific PCB type are to be generated.
- Creating and viewing changeover instructions (Set-up modification) (see Fig. 14.4.3)
● Click on button Set-up modification.
Depending on the set-up changeover selection made from the selection window (see
Fig. 14.4.1), instructions for changeover - created by the Set-Up Modification Generator - from the
initial set-up to the selected set-up or a follow-up set-up created by the Set-Up Modification Gene-
rator (see section 14.4.3.2) are displayed for the "Siplace_2" station.
When the Set-Up Modification Generator was opened by a station controller, changeover instruc-
tions for the changeover from the current set-up on the station to the follow-up set-up are created
and displayed.