00191413-01.pdf - 第501页
User Manual Line Computer UNIX 16 MaDaMaS Software Version 501.xx 01/99 Issue 16.1 Introduction 16 - 5 Group 3 Fiducial error Start: The Vi sion System r eports an uni dentified fiduc ial, the Fid ucial E rror m enu is d…
16 MaDaMaS User Manual Line Computer UNIX
16.1 Introduction Software Version 501.xx 01/99 Issue
16 - 4
16.1.1.2 Definition of Start and End of the Time Recorded for a Given Type of Event
Beginning and end of the recorded time for a given type of event:
Group 1
Abort button actuated
Start: Actuation of Stop button and selection of "Abort placem."
End: Start of PCB transport to the output conveyor
Emergency stop actuated / compressed air failure
Start: Actuation of Emergency stop
End: Actuation of Start button
Emergency stop actuated / compressed air failure
Start: Pressure below the threshold value (message at the station "Switch on compressed air")
End: Actuation of Start button
Stop button actuated
Start: Actuation of Stop button
End: Actuation of Start button
Group 2
Waiting for PCB in input belt
Start: The input conveyor is empty, the preceding PCB is moved out of the center conveyor.
End: Presence of a PCB on the input conveyor.
Waiting for PCB in center conveyor
Start: Start of the PCB transport from the input conveyor to the center conveyor.
End: The PCB is located on the center conveyor, the center conveyor is switched off.
Wait until output conveyor/center conveyor is clear
Start: The last position of the PCB has been assembled and the PCB is to be transported to the
output conveyor, yet the output conveyor is occupied by another PCB.
End: The PCB is located on the output conveyor, the conveyor belt is switched off.
Placement / Glueing
Start: The PCB is located on the center conveyor, the conveyor belt is switched off.
End: The last position of the PCB has been assembled / glued.
User Manual Line Computer UNIX 16 MaDaMaS
Software Version 501.xx 01/99 Issue 16.1 Introduction
16 - 5
Group 3
Fiducial error
Start: The Vision System reports an unidentified fiducial, the Fiducial Error menu is displayed
on the screen of the station computer.
End: End of error handling (the operator selects "Continue placement" or "Abort placement").
Track error
Start: The station cannot place any more components, the Track Error menu is displayed.
End: End of error handling (the operator selects "Continue placement" bzw. "Abort placement").
General machine malfunction
Explanation: The term "General machine malfunction" encompasses all malfunctions that have not
explicitly been assigned a specific cause.
Start: Detection of the malfunction, the corresponding Error menu is displayed.
End: End of error handling (the operator selects "Continue placement" or "Abort placement").
Transport error
Start: Identification of the transport error, i.e. the conveyor belt is running, Timeout is signalled
and the Transport Error menu is displayed.
End: End of error handling (the operator selects "Continue placement" or "Abort placement")
Barcode error
Start: Barcode cannot be read (machine is in the barcode mode).
End: End of error handling.
Replacement of glue wiping roll
Start: Station stops and signals "Glue cleaning pad paper finished".
End: Actuation of the Start button and selection of "Continue placement" from the menu.
Cartridge 1 (2) (3) empty
Start: Station stops and signals "Cartridge 1 (2) (3) empty"
End: Actuation of the Start button, selecting "Confirm cartridge" and subsequently "Continue
placement" from the menu.
User Manual Line Computer UNIX 16 MaDaMaS
Software Version 501.xx 01/99 Issue 16.1 Introduction
16 - 6
Group 4
Cycle mode active
Start: Actuation of Stop button and selection of "Cycle mode on" from the menu.
Ende: Actuation of the Start button and "Cycle mode off" from the menu.
Keyswitch in slow position
Start: Turning keyswitch to the "slow" position (minimum speed).
Ende: Turning the keyswitch back to normal speed, actuation of the Start button.
Single Function / Vision System
Start: Selection of "Single functions" or "Vision system" from the menu.
Ende: Exiting from the "Single functions" or "Vision system" menu.