FlexTRAK OH Material Handler Manual.pdf - 第114页

FlexTRAK-OH Material Handli ng System IOM Manual Material Handler Operation 4-26 © 2023 Nordson C orporation 4.12.2 Station 20 The red highlighted a rea in Figure 4- 34 shows the loca tion of Station 20 (tr ansfer input …

FlexTRAK-OH Material Handling System IOM Manual Material Handler Operation

4.12.1.5 Motor Control in Axis 8 (Z-Axis)

Pressing the MOTOR button on the Device Control screen (Figure 4-27) displays a configuration list of

motor driver parameters and the axis platform position.

Refer to 4.11 Station Main Menu Layout for interface descriptions.

The following selections are available in the "Pos Name" drop down list (Figure 4-32):

• Top gripper to top platform

• Top gripper to bottom platform

• Bottom gripper to bottom platform

• Top gripper to Stn20 gripper

• Bottom gripper to Stn20 gripper

• Strip barcode scan position

• Magazine barcode scan position

• Strip slot mapping position

Figure 4-32 Station 10 – Axis 8 (Z-Axis) Screen

The red highlighted area in Figure 4-33 shows the location of Axis 8 in Station 10.

Figure 4-33 Station 10 – Axis 8 (Z-Axis) Location

FlexTRAK-OH Material Handling System IOM Manual Material Handler Operation

4.12.2 Station 20

The red highlighted area in Figure 4-34 shows the location of Station 20 (transfer input module) in the

FlexTRAK-OH.

Figure 4-34 Station 20 (Transfer Input Module) Location

4.12.2.1 Input Screens

Main Screen – Refer to 4.11 Station Main Menu Layout for interface descriptions.

Input and Output Mode – Refer to 4.10 General I/O Screen for interface descriptions.

Figure 4-35 Station 20 – Input 1 Screen

FlexTRAK-OH Material Handling System IOM Manual Material Handler Operation

Figure 4-36 Station 20 – Input 2 Screen

4.12.2.2 Device Control Screen

Label Description

Cylinder Shows the control list of electro-pneumatic cylinders.

Motor

Shows the configuration list of motor driver parameters and the

axis platform position.

Figure 4-37 Device Control Screen