FlexTRAK OH Material Handler Manual.pdf - 第27页
FlexTRAK-OH Material Handli ng System IOM Manual Introductio n © 2023 Nordson C orporation 1-17 1.6 Strip Dimensions and Identifi cation The FlexTRAK - OH system h as a strip ID reader ( Fig ure 1- 14 ) to identif y the …
FlexTRAK-OH Material Handling System IOM Manual Introduction
1-16 © 2023 Nordson Corporation
1.5.10 Overhead Magazine Unloading Port (Stn50)
The Overhead Magazine Unloading Port provides a magazine unloading mechanism to the overhead
conveyor system.
Item
Name
A Magazine Transfer Cylinder
B Magazine Side Pusher
C Magazine Rear Pusher
D Magazine Gripper Cylinder
E Magazine Gripper Linkage Gear
Figure 1-13 Overhead Magazine Unloading Port (Stn50)
FlexTRAK-OH Material Handling System IOM Manual Introduction
© 2023 Nordson Corporation 1-17
1.6 Strip Dimensions and Identification
The FlexTRAK-OH system has a strip ID reader (Figure 1-14) to identify the strip’s unique identity code
printed on the strip surface. See 1.5.3 Strip Loading Buffer (Stn20) for more information.
The strip must be inserted into the magazine in the correct orientation. Ensure the magazine is loaded with
a good strip in terms of physical and data printing, clarity, and orientation (Figure 1-15).
Figure 1-14 Strip Identity Code
Type Size
Length
Min: 75 mm
Max: 320 mm
Thickness
Min: 0.08 mm
Max: 3 mm
Width
Min: 25 mm
Max: 100 mm
Warpage
(gap between highest and lowest
strip displacement)
8 mm
Figure 1-15 Strip Dimensions
FlexTRAK-OH Material Handling System IOM Manual Introduction
1-18 © 2023 Nordson Corporation
1.7 Magazine Dimensions
Magazine dimensions are shown in Figure 1-16.
Type Size
Length
Min: 80 mm
Max: 330 mm
Height
Min: 75 mm
Max: 200 mm
Width
Min: 35 mm
Max: 110 mm
Weight (fully filled with strip)
6 kg
Pitch (distance between strips in magazine)
2.5 mm
Figure 1-16 Magazine Dimensions
1.8 General Operation Flow
1.8.1 Pre-Production Check
To perform a preproduction check:
1. Log in into the teaching pendant.
2. Confirm the production recipe and select the auto process mode (default mode).
3. Ensure the correct conversion size kit is installed according to the production recipe used.
4. Ensure no magazine is present in the conveyor or at the magazine transfer station.
5. Ensure no strip is present inside the plasma chamber or at the buffer area.
6. Ensure no alarms are displayed on the main HMI screen.
Reset it if there are any.
7. Do not manually load a magazine during machine initialization.
A backup feature for magazine manual loading and unloading ports before machine
initialization is available at machine front side.
NOTE Request technical support if any of above items are unable to be resolved.