FlexTRAK OH Material Handler Manual.pdf - 第199页

FlexTRAK-OH Material Handli ng System IOM Manual Parts Replacement © 2023 Nordson C orporation 7-3 7.9 Spare Parts List This sect ion contains a li st of item num bers corres ponding to the pa rt descripti on. Review t h…

FlexTRAK-OH Material Handling System IOM Manual Parts Replacement

7.3.2 Shipping Instructions

When ordering parts, specify which carrier you prefer to use and provide your shipping account number.

If no instructions are received, March will determine the best shipping method and items will be shipped

prepaid with the shipping charge added to the invoice.

7.4 Warranty

Contact March Technical Support for any warranty issues pertaining to spare parts. Wear items and

consumables are covered under warranty against manufacturer defect only. Expected lifetimes for these

parts will vary based upon application and use model.

Consumable parts are generally considered as parts that are replaced on a frequency of > 1 per calendar

year under expected regular usage. In most cases, these parts are “wetted parts” that contact the dispensed

fluid.

Wear items are those items that have been identified to have limited life expectancy (less than 5 years) but

are not considered consumables. Wear items are often highly application dependent, high user-touch, or

adjusted parts.

7.5 Credit and Exchanges

Contact March Customer Service for credit or exchanges of recommended spare parts or refurbished

components (components restored to original specifications but not sold as new).

7.5.1 Return Material Authorization

Contact March Technical Support to obtain a Return Material Authorization (RMA) before returning any

parts.

 NOTE Find your local Technical Support contact on the March web page,

www.nordsonasymtek.com

7.6 Record Keeping

The type of service performed should be recorded in the dispensing system maintenance records. Dates,

part numbers/serial numbers of replaced parts, names of technicians, and other pertinent data should be

recorded.

7.7 Unpacking and Inspecting Replacement Parts

Replacement parts are shipped to distributor or customer facilities in individual shipping cartons. Review

the packing slip to ensure that the correct parts were received. Contact March Technical Support if any

discrepancies are discovered.

Before unpacking your spare parts, visually inspect the carton for damage. If applicable, check the shock

sensors and tip sensors for indications of improper shipping and handling. Inform the freight carrier of

any damage.

7.8 Cleaning and Inspection

Always clean the applicable area after a failed part is removed from the system. Inspect the area for signs

of what may have caused the part to fail. This may help prevent future part damage. While removing parts

that will be reinstalled, visually inspect them for damage. If found undamaged, retain them for

reinstallation. Replace damaged parts and hardware as appropriate.

FlexTRAK-OH Material Handling System IOM Manual Parts Replacement

7.9 Spare Parts List

This section contains a list of item numbers corresponding to the part description. Review the spare parts

kits Excel file for the item number referencing the part number when ordering replacement parts for the

FlexTRAK-OH. Contact March Technical Support for questions.

FlexTRAK-OH Material Handling System IOM Manual Parts Replacement

7.10 Mechanical Parts Lists (Level 1)

Mechanical Parts (Level 1) are shown in Figure 7-1 through Figure 7-20.

7.10.1 Transfer Assembly

7.10.1.1 List 1

Assembly Drawing

Number

Part Number Description

Estimated

Life Span

(cycles)

Quantity

A100.04.AA.1200 0001-06006-00032 SHOCK ABSORBER 100,000 1

A100.04.AA.3200 0001-06006-00031 SHOCK ABSORBER 100,000 1

A100.04.AA.3300 0001-06006-00031 SHOCK ABSORBER 100,000 1

A100.04.AA.1000 0001-08008-00733 DOUBLE ACTING CYLINDER 150,000 1

A100.04.AA.2000 0001-08008-00730 DOUBLE ACTING CYLINDER 250,000 1

A100.04.AA.2000 0001-04006-00335 LM GUIDE 800,000 1

Figure 7-1 Transfer Assembly List 1