FlexTRAK OH Material Handler Manual.pdf - 第17页
FlexTRAK-OH Material Handli ng System IOM Manual Introductio n © 2023 Nordson C orporation 1-7 1.5.1 Overhea d Magazine Loading P ort (St n1 0) Item Name Description A Magazine Precisor Datum Point The Magazine P recisor…
FlexTRAK-OH Material Handling System IOM Manual Introduction
1-6 © 2023 Nordson Corporation
1.5 Material Handling System (MHS) Components
MHS system components are shown in Figure 1-3 through Figure 1-13.
Item
Name
1 Overhead Magazine Loading Port (Stn10)
2
Loader Lifter (Stn20)
3 Strip Loading Buffer (Stn20)
4 Strip Transfer – Loading (Stn30)
5
Strip Transfer – Claw (Stn30)
6
Overhead Return Conveyor (Stn60)
7
Strip Transfer – Unloading (Stn40)
8
Strip Unloading Buffer (Stn40)
9
Unloader Lifter (Stn50)
10
Overhead Magazine Unloading Port (Stn50)
Figure 1-3 Material Handling System Features
FlexTRAK-OH Material Handling System IOM Manual Introduction
© 2023 Nordson Corporation 1-7
1.5.1 Overhead Magazine Loading Port (Stn10)
Item
Name
Description
A Magazine Precisor Datum Point
The Magazine Precisor Datum Point receives an untreated
strip magazine from the overhead conveyor. The precisor
rear pusher (A1) and precisor side pusher (A2) will push the
magazine to magazine transfer cylinder (B).
B Magazine Transfer Cylinder
The Magazine Transfer Cylinder provides a magazine
bridging to transfer the magazine from this module to loader
lifter module (Figure 1-5).
Figure 1-4 Overhead Magazine Loading Port (Stn10)
1.5.2 Loader Lifter (Stn20)
The Loader Lifter provides a magazine elevator motor (lifting up and down) to transfer the magazine
from loading port module to strip loading buffer and overhead return conveyor modules. Refer to 1.5.3
Strip Loading Buffer (Stn20) for further part descriptions in this module.
FlexTRAK-OH Material Handling System IOM Manual Introduction
1-8 © 2023 Nordson Corporation
Item
Name
A1 Magazine Elevator Motor
B1 Loaded Magazine Gripper
B2 Empty Magazine Gripper
Figure 1-5 Loader Lifter (Stn20)