FlexTRAK OH Material Handler Manual.pdf - 第146页
FlexTRAK-OH Material Handli ng System IOM Manual Material Handler Operation 4-58 © 2023 Nordson C orporation 4.12.6 Station 60 The red highlighted a rea in Figure 4- 93 shows the loca tion of Station 60 (OH c onveyor mod…
FlexTRAK-OH Material Handling System IOM Manual Material Handler Operation
© 2023 Nordson Corporation 4-57
4.12.5.5 Motor Control in Axis 9 (X-axis)
Pressing the MOTOR button on the Device Control screen (Figure 4-85) displays a configuration list of
motor driver parameters and the axis platform position.
Refer to 4.11 Station Main Menu Layout for interface descriptions.
The following selections are available in the "Pos Name" drop down list:
• Top gripper to top platform
• Top gripper to bottom platform
• Bottom gripper to bottom platform
• Top gripper to Stn40 gripper
• Bottom gripper to Stn40 gripper
• Magazine barcode scan position
Figure 4-91 Station 50 – Axis 9 (X-Axis Motor) Screen
The red highlighted part in the following image shows the location of Axis 9 (X-axis motor) in Station 50.
Figure 4-92 Station 50 – Axis 9 (X-Axis Motor) Location
FlexTRAK-OH Material Handling System IOM Manual Material Handler Operation
4-58 © 2023 Nordson Corporation
4.12.6 Station 60
The red highlighted area in Figure 4-93 shows the location of Station 60 (OH conveyor module) in the
FlexTRAK-OH.
Figure 4-93 Station 60 – OH Conveyor Module
4.12.6.1 I/O Screens
Main Screen – Refer to 4.11 Station Main Menu Layout for interface descriptions.
Input and Output Mode – Refer to 4.10 General I/O Screen for interface descriptions.
Figure 4-94 – Station 60 – Input Screen
FlexTRAK-OH Material Handling System IOM Manual Material Handler Operation
© 2023 Nordson Corporation 4-59
Figure 4-95 Station 60 – Output Screen
4.12.6.2 Device Control
Label Description
Cylinder Shows the control list of electro-pneumatic cylinders.
Figure 4-96 Device Control