FlexTRAK OH Material Handler Manual.pdf - 第173页
FlexTRAK-OH Material Handli ng System IOM Manual Maintenance © 2023 Nordson C orporation 5-9 5.9.4 Loader a nd Unloader Elevator Zer o Gap (CY L 2004 and 4004) Cylinder 200 4 and 4004 are located in b etween the c lamper…
FlexTRAK-OH Material Handling System IOM Manual Maintenance
5-8 © 2023 Nordson Corporation
5.9.3 Loader Elevator Kicker (CYL 2003)
To remove and replace the loader elevator kicker cylinder (Figure 5-5):
1. Loosen two (2) screws (A) to separate cylinder 2003 with the adjustment mounting plate (B).
2. Remove the cylinder.
3. Reverse the steps above to install a new cylinder into the module.
Figure 5-5 Loader Elevator Kicker Cylinder
FlexTRAK-OH Material Handling System IOM Manual Maintenance
© 2023 Nordson Corporation 5-9
5.9.4 Loader and Unloader Elevator Zero Gap (CYL 2004 and 4004)
Cylinder 2004 and 4004 are located in between the clamper holder plate.
To remove and replace the loader and unloader elevator zero gap cylinders (Figure 5-6):
1. Loosen the four (4) screws (A) to separate the right clamper holder plate (B) with the
cylinder (C).
2. Remove the right clamper plate.
3. Loosen the four (4) screws (D) to separate the left clamper holder plate (E) with the
cylinder.
4. Remove the left clamper plate.
5. Reverse the steps above to install a new cylinder into the module.
Figure 5-6 Loader and Unloader Elevator Zero Gap Cylinders
FlexTRAK-OH Material Handling System IOM Manual Maintenance
5-10 © 2023 Nordson Corporation
5.9.5 Input/Output Transfer X-Axis (CYL 3004 and 3006)
To remove and replace cylinders 3004 and 3006 (Figure 5-7):
1. Loosen two (2) screws (A) to separate the cylinder with the buffer base guider (B).
2. Remove the cylinder from each station.
3. Reverse the steps above to install a new cylinder into the module.
Figure 5-7 Input/Output Transfer X-Axis Cylinders (Double Acting Cylinders)