FlexTRAK OH Material Handler Manual.pdf - 第22页
FlexTRAK-OH Material Handli ng System IOM Manual Introductio n 1-12 © 2023 Nordson C orporation 1.5.6 Overhead Return Con veyor (Stn 60) This module provides mecha nism components ( Items A - G) to transfer the magazine …
FlexTRAK-OH Material Handling System IOM Manual Introduction
© 2023 Nordson Corporation 1-11
1.5.5 Strip Transfer – Claw (Stn30)
Item
Name
Description
1
Loader Claw 2 Limit Sensors
Detects if the claw is disengaged from magnetic coupling.
2
Unloader Claw 1 Limit Sensors
Detects if the claw is disengaged from magnetic coupling.
3
Unloader Claw 1 Strip Present
Sensor
Detects strip protrusion between the plasma chamber and the
output buffer lane.
4
Loader Claw 2 Strip Present
Sensor
Detects strip protrusion between the plasma chamber and the
input buffer lane.
5 Axis 4: Transfer Actuator
Transfers Loader Claw 2 and Unloader Claw 1 assemblies to
the following positions:
• Standby
• Load position
• Plasma position
• Unload position
• Plasma check position
• Unload check position
6 Cylinder Loader Claw 2
Toggles the claws between clawing (down) and standby (up)
positions.
7 Cylinder Unloader Claw 1
Toggles the claws between clawing (down) and standby (up)
positions.
8 Loader Claws
Transfers untreated strips from input buffer lanes into the
plasma chamber lanes.
9 Unloader Claws
Transfers treated strips from plasma chamber lanes into the
output buffer lanes.
Figure 1-8 Strip Transfer – Claw (Stn30)
FlexTRAK-OH Material Handling System IOM Manual Introduction
1-12 © 2023 Nordson Corporation
1.5.6 Overhead Return Conveyor (Stn60)
This module provides mechanism components (Items A-G) to transfer the magazine from loader lifter
(Figure 1-5) module to unloader lifter module (Figure 1-12).
Item Name
A Magazine Claw – Push In
B
Magazine Pusher Into Conveyor Cylinder
C
Magazine Conveyor – Induction Motor
D Magazine Present Sensor
E
Magazine Present Sensor
F
Magazine Claw – Push Out
G
Magazine Pusher Out From Conveyor Cylinder
Figure 1-9 Overhead Return Conveyor (Stn60)
FlexTRAK-OH Material Handling System IOM Manual Introduction
© 2023 Nordson Corporation 1-13
1.5.7 Strip Transfer – Unloading (Stn40)
Item
Name
Description
1
Axis 7 Actuator - Pinch Wheel
Roller Out
Transfers treated strip into magazine slot.
2
Loader Strip Through Present
Sensor
Checks for protrusion of strips into the gap between
the output buffer lanes and the magazine.
3
Transfer Output Buffer Pinch Wheel
Cylinder
Exerts pinching pressure through the pinch wheels
onto the strip. Correct pinch pressure ensures that
sufficient force is applied to the strip to effect transfer.
4 Output Buffer Strip Stopper Cylinder
Ensures that both the magazine slot and output buffer
lane are empty (no strips are present) after the strip
rolling process is completed.
5 Conversion Kit: Output Buffer Lane
Output strip buffer conversion kit. Conversion kits are
specific to strip size.
6
Cylinder 3005: Output Transfer
Z-Axis
Elevates the output buffers to the same Z-axis position
as the plasma chamber rails to facilitate clawing of
strips into/out of plasma chamber.
7
Cylinder 3006: Output Transfer
X-Axis
Engages the output buffer lanes with the plasma
chamber rails for "Zero Gap" transfer of strips.
Figure 1-10 Strip Transfer – Unloading (Stn40)