FlexTRAK OH Material Handler Manual.pdf - 第132页
FlexTRAK-OH Material Handli ng System IOM Manual Material Handler Operation 4-44 © 2023 Nordson C orporation 4.12.4.3 Cylinder Control 1 Pressing the CYLINDE R butt on on the Device Contr ol screen ( Figure 4- 65 ) will …
FlexTRAK-OH Material Handling System IOM Manual Material Handler Operation
© 2023 Nordson Corporation 4-43
4.12.4.2 Device Control Screen
Label
Description
Cylinder Shows the control list of electro-pneumatic cylinders.
Motor
Shows the configuration list of motor driver parameters and the
axis platform position.
Figure 4-65 Device Control Screen
FlexTRAK-OH Material Handling System IOM Manual Material Handler Operation
4-44 © 2023 Nordson Corporation
4.12.4.3 Cylinder Control 1
Pressing the CYLINDER button on the Device Control screen (Figure 4-65) will show the control list of
electro-pneumatic cylinders.
Figure 4-66 Station 40 – Cylinder Control 1 Screen
Label
Description
CYL 4001
Clamp – Grip magazine.
Unclamp – Release magazine.
CYL 4002
EXT – Pushes the treated strip into the magazine slot completely
after the pinch wheel has retracted up.
RET – Pulls kicker out from the magazine slot.
CYL 4003
EXT – Moves the kicker down to strip kicking position when strip
has been transferred out by the pinch wheel and W010.11 is
turned off.
RET – Lifts the kicker from the strip kicking position.
Figure 4-67 Station 40 – Cylinder Control 1 Location
FlexTRAK-OH Material Handling System IOM Manual Material Handler Operation
© 2023 Nordson Corporation 4-45
4.12.4.4 Cylinder Control 2
Figure 4-68 Station 40 – Cylinder Control 2 Screen
Label Description
CYL 4004
EXT – Move the elevator to form zero gap with the output buffer
lane to receive the treated strip back to the magazine.
RET – Retract the elevator away from the transfer buffer lane
before moving to the next lane.
Figure 4-69 Station 40 – Cylinder Control 2 Location