FlexTRAK OH Material Handler Manual.pdf - 第35页
FlexTRAK-OH Material Handli ng System IOM Manual Safety © 2023 Nordson C orporation 2-5 Figure 2-1 FlexTRAK - OH Overall Safety Hazard Lab el Locat ions ( Top View ) Figure 2-2 Laser Beam Location 1 – Input Buf fer Lane
FlexTRAK-OH Material Handling System IOM Manual Safety
2-4 © 2023 Nordson Corporation
2.9 Safety Warning Labels
Safety labels on the FlexTRAK-OH Material Handler point out potentially hazardous areas and remind
personnel to take necessary safety precautions. Safety warning label are described in Table 2-1. Warning
label locations are shown in Figure 2-1 through Figure 2-4.
WARNING! Comply with all safety warning labels or serious injury to personnel or damage to
the system may occur. Worn or damaged labels should be replaced with new
labels.
Table 2-1 Safety Warning Labels
No.
Category
Label
Type
Safety Precaution
1
Mechanical
DANGER!
Crush Hazard
Keep hands clear while operating. Lock out
power before servicing.
2
WARNING!
Moving Parts
Present
Keep hands away from moving parts. Lock
out power before servicing.
3
WARNING!
Pinch Point and
Mechanical
Entanglement
Keep hands away from the machine. Lock out
power before servicing.
4
CAUTION!
Hot Surface
Do not touch. It can cause skin burns upon
contact. Allow the surface to cool and lock out
power before servicing.
5 Electrical
WARNING!
Hazardous
Voltage
Lock out power before servicing.
6 Laser
CAUTION!
Class 1 Invisible
Laser Radiation
Presence
This is a class 1 laser beam type. Laser
emission from this product is not automatically
stopped when it is dissembled. Do not have
direct eye contact with the laser beamline.
7 Radiation
WARNING!
Non-ionizing
radiation exists
inside
Exposure may cause body tissues damage.
Lock out power before servicing.
FlexTRAK-OH Material Handling System IOM Manual Safety
© 2023 Nordson Corporation 2-5
Figure 2-1 FlexTRAK-OH Overall Safety Hazard Label Locations (Top View)
Figure 2-2 Laser Beam Location 1 – Input Buffer Lane
FlexTRAK-OH Material Handling System IOM Manual Safety
2-6 © 2023 Nordson Corporation
Figure 2-3 Laser Beam Location 2 - Claw Module
Figure 2-4 Laser Beam Location 3 - Output Buffer Lane