1OM-1064-002.pdf - 第115页
2. Hierarchical Structure of Operation Displays [AUTO OPN MODE] Key AUTO OPN. SUB-MENU AUTO OPN MODE SPECIAL SEL. MACHINE SET-UP [MANUAL MODE] Key [DA T A EDIT] Key [SPECIAL SEL.] Key [MACHINE SET-UP] Key DA T A EDIT MAN…
2. Hierarchical Structure of Operation Displays
9910-001 2-16 Tg0246-PM-OP
The “MAIN MENU” display can be assumed as the trunk of a tree and looks
as shown in Fig. 2.13.
Fig. 2.13
This display is provided with five keys, enabling the operator to select each
display according to your desired operation or purpose.
[AUTO OPN MODE] Key
This option is mainly used for automatic operation and consists of labels
(designation of automatic operation, automatic operation step, etc.) related
to automatic operations based upon the pattern program data.
[MANUAL MODE] Key
This option is mainly used for set-up operations and consists of the labels
such as program change, zeroing operation, manual selection, etc.
[DATA EDIT] Key
This option consists of labels for data editing (pattern program data, compo-
nent library data, device data, offset data, etc.).
[SPECIAL SEL.] Key
This option consists of labels (management data, recall messages, device
check (input check), teaching operation, etc.) related to machine mainte-
nance and inspections.
[MACHINE SET-UP] Key
This option consists of labels related to machine set-up operations which
enable the operator to set a password, the tower lights, buzzer, calendar,
error indicating colors, monitor, etc.
2. Hierarchical Structure of Operation Displays
[AUTO OPN MODE]
Key
AUTO OPN. SUB-MENU
AUTO OPN MODE
SPECIAL SEL.
MACHINE SET-UP
[MANUAL MODE]
Key
[DATA EDIT]
Key
[SPECIAL SEL.]
Key
[MACHINE SET-UP]
Key
DATA EDIT
MANUAL MODE
[AUTO OPN.
SUB-MENU] Key
2.2 Hierarchical (Tree) Structure of Operation Menus
All operation menus can be selected through touch screen key
operations.
The “MAIN MENU” display holds the following branch dis-
plays. Selecting a menu key leads the operator to the corre-
sponding display.
0004-002 2-17 Tg0246-PM-OP
2. Hierarchical Structure of Operation Displays
2.3 Hierarchical Displays
As shown in Fig. 2.14, the labels have a hierarchical tree structure and the
branch labels are displayed longitudinally under the trunk label such as “MAIN
MENU ####”. This provides a clear visual display of location in the hierarchi-
cal structure.
Note: In certain cases, the corresponding display may not be opened. In this
case, an [RTN] key appears on the screen, enabling the operator to go
back to the previous display. (Fig. 2.15)
• The lowest single frame shows the current hierarchical position.
• When a double frame key is selected, the current position is shifted to the
selected branch.
• The numbers shown at the bottom right of the keys “MAIN MENU XXXX”
and “RTN XXXX” represent the hierarchical Nos.
• Pressing the [RTN] key opens the previous display.
Note: When the [RTN] key is pressed at a data edit display such as the
“PATTERN PROGRAM EDIT” and “COMPONENT LIBRARY
EDIT” displays, a display for data saving appears on the screen.
Fig. 2.14
Fig. 2.15
9910-001 2-18 Tg0246-PM-OP