1OM-1064-002.pdf - 第67页
CAUTION When the LED (-HD09) of the [READY] button is not ON, the machine cannot start the automatic operation. While the LED is ON or flickers, the supply cover and the safety bar are locked and cannot be opened. Do not…
Maintenance Cover (B)
[READY] Button
Safety Bar (B)
Feeder Base
Supply Cover (B)
Maintenance Cover (A)
Supply Cover (A)
[READY] Button
Safety Bar (A)
Feeder Base
5.5 [READY] Button
5. Operation Panel (Names and Functions)
0004-002 1-36 Tg0246-PM-OP
• The [READY] button is used to tell the machine that the feeder on the feeder
base is set ready for replacement or component supply.
• When a component shortage error occurs during automatic operation, the
X/Y beam moves to its standby position and the LED (-HD09) of the
[READY] button (on the error-caused side) extinguishes.
At this time, the supply cover and the safety bar on the related side are
unlocked, making them accessible for feeder replacement and component
supply.
• When the [READY] button is pressed with the LED (-HD09) kept ON, the
X/Y beam on the related side moves to its standby position, the LED (-
HD09) of the [READY] button extinguishes, and the supply cover and the
safety bar on the related side are unlocked, making them accessible for feeder
replacement and component supply.
While the X/Y beam is moving to its standby position, the supply cover and
the safety bar on the related side are kept locked and the LED (-HD09) of
the [READY] button blinks.
• After feeder replacement or component supply work, close the supply cover
and the safety bar and then press the [READY] button to set the machine in
the “READY” mode.
(Front View) (Beam B Side) (Rear View) (Beam A Side)
Fig. 1.13
CAUTION
When the LED (-HD09) of the [READY] button is not ON, the machine
cannot start the automatic operation.
While the LED is ON or flickers, the supply cover and the safety bar are
locked and cannot be opened.
Do not try to open them forcibly to avoid any danger.
0004-002 1-37 Tg0246-PM-OP
5. Operation Panel (Names and Functions)
• When the [READY] button is pressed right after the supply cover and the
safety bar are closed, the LED (-HD09) of the button may not illuminate
immediately.
When the LED (-HD09) is not ON, confirm that the supply cover and the
safety bar are closed and press the [READY] button again.
• When the supply cover and the safety bar are opened with the LED OFF, the
load power for the servomotor driver on the related X/Y beam is shut off.
CAUTION
The X/Y beam on the other side is moving though the supply cover and
the safety bar are opened.
Rectify the operating range of the X/Y beam and pay special caution
while supplying components, etc.
• The keys having the same function as the [READY] button are provided at
the “AUTO OPN. SUB-MENU” display. (Hierarchical Sequence: “MAIN
MENU” Display
“AUTO OPN. MODE <PLACEMENT>” Display
“AUTO OPN. SUB-MENU” Display)
〈〈FEEDER CHANGE-OVER PREPARATION COMPLETE〉〉 [SIDE A],
[SIDE B]
Ready operation (operation to complete the preparation) is performed on
the selected side.
Press either the [SIDE A [MOVE]] or the [SIDE B [MOVE]] key and then
the [MOVE] button.
Fig. 1.14 P.C.B. Flow (From Left to Right)
6. Outline of System Operation
0004-002 1-38 Tg0246-PM-OP
6. Outline of System Operation
6.1 Perspective
(1) The P.C.B. sent to L conveyer is transferred from the input machine to the
standby position in Fig. 1.14.
(2) The P.C.B. at the standby position is transferred to the P.C.B. positioning
section and positioned there after the component-placed P.C.B. at the P.C.B.
positioning section is sent to the R conveyor.
Multi-Layer Tray Feeder L
(Option)
Multi-Layer Tray Feeder R
(Option)
Feeder Base #1
Feeder Base #2
Tape Feeder (Vibratory Stick Feeder)
Feeder Base #4
Feeder Base #3
Ta
p
e Feeder
Nozzle Stocker
Component Recognition Camera
Nozzle Stocker
Component
Recognition Camera
Tray Palette
R Conveyor
P.C.B. Positioning Section
L Conveyor
Standby Position
P Conveyor
(P.C.B. Positioning
Section)
(Front Side of Machine)
P.C.B. Flow Direction
(Input Machine)
(Output Machine)