1OM-1064-002.pdf - 第42页

9910-001 1-12 Tg0246-PM-OP 2. Specifications Supply Pressure 0. 49 to 0.69 MPa (5 to 7 kg f/cm 2 ) Dry and Clean Air (Moisture, oil, and dust are remov ed.) Set Pressure 0.49 MPa (5 kg f/cm 2 ) 31. Air Supply • Dray and …

2. Specifications

9910-001 1-11 Tg0246-PM-OP

Fiducial Marks

Through

Hole

Shapes

Pad Marks

Size 0.5 to 2.0 mm

Material

• Copper Leaf (Au and Ni plating possible but mirror surfaces

cannot be used.)

• Solder-Plated Marks (Consult our sales personnel for details.)

• Solder Leveler (Consult our sales personnel for details.)

27. Fiducial Marks

Notes : (a) A through hole or a pad mark should have only one land which

is directed in increments of 45°. Consult our sales personnel for

details.

(b) The fiducial mark should make ample contrast with the

surroundings.

recognized because of the extreme warpage of the PCB.

(d) Anything like a pattern similar to a fiducial mark should not

exist in the designated window. If exists, it may cause a false

recognition. Also the shape (a cutout, a punched hole) of the

PCB, the light reflected from a structure, or the light from the

external elements may sometimes interfere with the recognition.

Consult our sales personnel for details.

(e) Consult our sales personnel for details if you require additional

information.

28. Specifications of

Automatic Setup

Function

When a program change is made, the PCB transfer conveyor width and the

PCB backup pin’s up/down movement are automatically set up.

Minimum Unit of Movement

PCB Transfer Conveyor Width : 0.1 mm

(Resolution : 0.0025 mm/pulse)

PCB Backup Pin Up/Down Movement : 0.01 mm

(Resolution : 0.00048075 mm/pulse)

29. Power Supply 200 ± 20 V AC, 3-Phase, 50/60Hz

Connected to the power supply unit (3-phase 4-wire system)

(One of the four wires is used as a ground wire.)

30. Maximum Power

Consumption

Approx. 7 kVA

Others

(Under Development)

9910-001 1-12 Tg0246-PM-OP

2. Specifications

Supply

Pressure

0. 49 to 0.69 MPa (5 to 7 kgf/cm

)

Dry and Clean Air (Moisture, oil, and dust are removed.)

Set

Pressure

0.49 MPa (5 kgf/cm

)

31. Air Supply

• Dray and Clean Air

Moisture : Dew Point −17℃ or lower (Atmospheric Pressure)

Oil : 0.1 mg/m

or less (ANR)

Dust : Solid Material 0.01 µm or less

32. Air Consumption Approx. 20 l/min (ANR)

33. Vacuum Pressure −93 kPa (70 cmHg)

34. Environmental

Condition

Temperature : 20 ± 10°C

Humidity : 30 to 80% (Avoid dew condensation.)

35. Basic Dimensions 1,700 (width) × 2,228 (depth, excluding the safety bar) × 1,565 mm (height)

Notes : (a) The height becomes 2,100 mm when the light tower is included.

(b) The depth becomes 3,118 mm when the safety bar is included.

2,420 kg (only the main body section)

Note : The mass changes depending on the type of feeders to be installed.

Mass of Options (For Reference)

Name Mass (kg)

Tape Feeder The mass depends on

feeder types.

Stick Feeder (Vibratory) Approx. 6.5/feeder

Multi-Layer Tray Feeder Approx. 180/feeder

Note : The mass related to components is not included.

36. Basic Mass

[Measuring Condition]

• Measuring Position

Position 1 m away and 1.6 m in height from the machine.

• Noise Measuring Instrument

Model: RION NA-60 (Range A)

• Requirements for Operation

Test Run Actions: No P.C.B. Transfer, No Component Picks/No

Recognition/No Placement, Repetition of Stages 11 and 12 for Multi-Layer

Tray Feeders L/R, Only One 32 mm Tape Feeder Activated (FDR No. 228)

Measuring

Point

*1 *2 *3 *4 *5 *6 *7 *8

Remarks

Measured

Noise

Value

[

]

70.8 70.6 70.8 68.4 68.7 69.6 68.4 69.1

Background

Noise

(Surroundings)

48.7 [dB]

37. Measured Noise

Value

2. Specifications

9910-001 1-13 Tg0246-PM-OP