1OM-1064-002.pdf - 第38页

2. Specifications 0004-002 1-8 Tg0246-PM-OP 15. A pplic abl e Components (1) Ap plicab le Co mpo nents S iz e : 1. 0 × 0.5 to 55 × 55 (150 × 26) mm T hi ck ne ss : Ma x. 25.4 mm L ea d Pitc h : 0.3 mm or more Ball Size :…

2. Specifications

9910-001 1-7 Tg0246-PM-OP

8. Vacuum Nozzle

Change Time

Approx. 1 second/point (under optimum conditions)

PCB Transition

Time

Approx. 4.5 seconds (under optimum conditions)

10. Minimum Unit of

X/Y Beam

Movement

0.01 mm (Designation of Placement coordinates)

(Resolution : 0.0025 mm/pulse)

11. Placement Angle

and Unit

0°

to 359°

59′ (1′

pitch)

(Rotational Resolution : 0.007° /pulse)

12. Placement

Accuracy

Chip-Type Component : ±

0.07 mm

IC (SOP, QFP, PLCC) : ±

0.04 mm

13. Applicable Feeders

• Tape Feeders

• Stick Feeders (Vibratory)

• Multi-Layer Tray Feeders (Option)

Notes : (a) Use the feeders especially prepared for the TIM-5000 series. The

feeders for another machine cannot be used.

(b) Refer to the specifications of each feeder for details.

14. Feeder Allocation Feeders can be installed on

“1 to 6” positions. Consult

our sales personnel for feeder

installation and combination.

Note : Stick feeders (vibratory) can be installed on only Feeder Base #1, #2

(Standard Specifications). Installation on a feeder base other than

Feeder Base #1, #2 is optional.

(Front Side of Machine)

Only Tray

Feeder

Only Tray

Feeder

PCB

2. Specifications

0004-002 1-8 Tg0246-PM-OP

15. Applicable

Components

(1) Applicable Components

Size : 1.0 × 0.5 to 55 × 55 (150 × 26) mm

Thickness : Max. 25.4 mm

Lead Pitch : 0.3 mm or more

Ball Size : φ 0.19 mm or more

Ball Pitch : 0.27 mm or more

Connector : Max. 150 × 26 mm

Note :

Some components cannot be used due to the mechanical characteristics

and shapes, etc.

Consult our sales personnel for details.

Applicable Components

•

Square Components

Resistors, Laminated Capacitors, Coils,

Chip Ceramic Filters, Other similar-shaped components

•

Leaded Components

Mini-Mold Transistors, Mini-Power Transistors, Filters, LEDs,

Diodes, Coils,

Other similar-shaped components

•

Deform Components

Tantalum Capacitors, Semi-Fixed Potentiometers, Aluminum Electrolytic

Capacitors, Trimmer Capacitors, Other similar-shaped components

•

Cylindrical Components

Resistors, Capacitors, Diodes,

Other similar-shaped components

•

ICs

Mini-Flat ICs, Plastic Chip Carrier with Leads,

Other similar-shaped components

•

Others

BGA, CSP, FC, Other similar-shaped components

(2)

Packaged Posture Standards

Tapes and Reels : JIS/EIAJ or its equivalent

•

Paper Tapes (Width : 8 mm)

•

Embossed Tapes (Width : 8 to 72 mm)

•

Adhesive Tapes (Width : 32 mm)

Reel Outer Diameter : φ 382 mm or less

Stick Feeder : 3.5 to 16 × 14 to 33 × 270 to 600 mm

Tray Feeder : 100 to 230 × 100 to 360 mm

Note :

Some taping sizes are limited. Some taped components, stick

components, or tray components cannot be used due to the mechanical

characteristics. Consult our sales personnel for details.

2. Specifications

9910-001 1-9 Tg0246-PM-OP

16. Number of

Installable Feeders

(1) Tape Feeders

Max. 76 feeders (when only 8 mm tape feeders are used)

(Max. 38 feeders when only 12 mm tape feeders are used)

(Max. 36 feeders when only 16 mm tape feeders are used)

(Max. 36 feeders when only 24 mm tape feeders are used)

(Max. 24 feeders when only 32 mm tape feeders are used)

(Max. 18 feeders when only 32 mm adhesive tape feeders are used)

(Max. 16 feeders when only 44 mm tape feeders are used)

(Max. 12 feeders when only 56 mm tape feeders are used)

(Max. 12 feeders when only 72 mm tape feeders are used)

(2) Stick Feeders (Vibratory)

Max. 12 feeders

(when only vibratory stick feeders are used)

(3) Tray Feeders

Max. 2 feeders (Up to 360 types can be used)

Ref. : Tray feeders do not give any effect to the number of installable tape

and stick feeders.

Note : The number of installable feeders varies according to the combination

of tape and stick feeders. Consult our sales personnel for details.

17. Placement Heads Equipped with 4 DD (Direct-Drive Motor) Heads (2 beams)

18. Number of

Stocked Vacuum

Nozzles

Up to 20 nozzles can be attached. (Standard)

Up to 40 nozzles can be attached. (Option)

When the machine is provided with the lead coplanarity detection function

(option), up to 30 nozzles can be attached.

1 Type/DD Head

(Selected automatically according to the components being used)

19. Control System Numerical Control by Microcomputer

20. Pattern Program

Data Code

ASCII Code

21. Pattern Program

Memory Capacity

Maximum Number of Steps : 5,000 steps/model

Maximum Memorized Number of Steps : 7,600 steps

Maximum Memorized Number of Models : 24 models

Note : The occupied capacity is determined according to the interrelation of

the above-described conditions.

22. Pattern Program

Data Saving

Built-In Backup RAM

Pattern program data can be saved in the data storage device of the

programming device (option).

23. Pattern Program

Data Editing and

Input

Pattern program data editing is possible through touch screen key operations

of the monitor for operation or using the programming device (option).

Pattern program data can be entered through serial data transfer from the data

storage device of the programming device.

24. Pattern Program

and Management

Data Output

Data can be displayed on the monitor for operation, printed out from the

printer (option), and transferred to the data storage device of the programming

device.