1OM-1064-002.pdf - 第157页

6. Starting, Emergency Stop, and T emporary Stop (Pause) Operations for Automatic Operation (“PLACE” Mode) Machine Set-Up RUN/WAIT PAUSE Possible Operations • Setti ng of Passw ord • Setting o f Light T ower and Alarm Da…

100%1 / 244
6. Starting, Emergency Stop, and Temporary Stop (Pause) Operations for Automatic Operation (“PLACE” Mode)
Special Selection
9910-001 2-58 Tg0246-PM-OP
RUN/WAIT PAUSE
Possible
Operations
•
Save Operation of Management Data
•
Save Operation of Recalled Data (Recalled
Messages)
• RECALL DEVICE ERROR
• RECALL HANDLING ERROR
• RECALL MACHINE INFO
• RECALL COMP. RECOG. ERROR
•
Display of Device Check Data
• Machine Program Information
•
Save Operation of Management Data
•
Save Operation of Recalled Data (Recalled
Messages)
•
Display of Device Check Data
• Machine Program Information
•
Zeroing Operation
•
Manual Subsystem Operation
•
Manual Axis Operation
Impossible Operations
•
Save Operation of Recalled Data (Recalled
Messages)
• Recalled Recognition Error Image
•
Editing and Save Operation of Manual Bypass
Data
•
Display of Device Check Data
• Input Check
• Memory Check
• Output Check
•
Shift to the “ZEROING OPERATION” Display
•
Shift to the “MANUAL SUBSYSTEM
OPERATION” Display
•
Shift to the “MANUAL AXIS OPERATION”
Display
•
Shift to the “UNIT ADJUSTMENT” Display
•
Shift to the “OFFSET TEACH” Display
•
Shift to the “DEVICE TEST” Display
•
Shift to the “HDD/FDD OPERATION”
Display
•
Editing and Save Operation of Manual
Bypass Data
•
Display of Device Check Data
• Input Check
• Memory Check
• Output Check
•
Shift to the “UNIT ADJUSTMENT”
Display
•
Shift to the “OFFSET TEACH” Display
•
Shift to the “DEVICE TEST” Display
•
Shift to the “HDD/FDD OPERATION”
Display
6. Starting, Emergency Stop, and Temporary Stop (Pause) Operations for Automatic Operation (“PLACE” Mode)
Machine Set-Up
RUN/WAIT PAUSE
Possible
Operations
•
Setting of Password
•
Setting of Light Tower and Alarm Data
•
Setting of Date and Time Data
•
Setting of Error Display Color
•
Setting of Screen Mode
•
Customization
Impossible
Operations
•
Setting of Password
•
Setting of Light Tower and Alarm Data
•
Setting of Date and Time Data
•
Setting of Error Display Color
•
Setting of Screen Mode
•
Customization
9910-001 2-59 Tg0246-PM-OP
Note: Some other operations may be possible or not, depending on whether
or not the operational requirements are fulfilled. Consult our sales per-
sonnel for details.
6. Starting, Emergency Stop, and Temporary Stop (Pause) Operations for Automatic Operation (“PLACE” Mode)
6.6 Interruption of Automatic Operation
6.6.1 How to Interrupt the Automatic Operation
(1) Immediately after it is found that a wrong pattern program (due to wrong
selection of pattern program data or wrong program change operation) is
used as a current one after the machine starts automatic operation, press
the [PAUSE] button to stop the automatic operation temporarily.
(2) After the machine has stopped, press the [SYS CLR] button to interrupt
the operation in progress and reset the machine to the normal condition.
The automatic operation is interrupted.
6.6.2 Function of [SYS CLR] Button
The [SYS CLR] button has the following functions.
• When the [SYS CLR] button is pressed, the software is reset to the same
condition as that set at power-up (when power is supplied).
The hardware is not reset.
• When the [SYS CLR] button is pressed with the machine in the “PAUSE”
mode, the “PAUSE” mode is canceled and the machine is set to the “STOP”
mode.
Note: When the [SYS CLR] button is pressed, an error condition is released
simultaneously with cancellation of the “PAUSE” mode as described
above. To relieve an error condition, it is recommended that the [RE-
SET] button be pressed.
While data is being exchanged between the machine and the program-
ming device (option), the communication is not interrupted.
When the [OPERATION/SET UP] switch is set to the “SET UP” side,
the system clear operation cannot be performed.
CAUTION
When the [SYS CLR] button is pressed, the
recovery function (automatic repair of compo-
nent handling error) is also canceled.
When the [SYS CLR] button is pressed, only initialization of each P.C.B. is
performed.
Fig. 2.40
9910-001 2-60 Tg0246-PM-OP