1OM-1064-002.pdf - 第195页

5. Operation Mode Fig. 3.12 “AL TERNA TE FEEDER MODE” “ENABLE” This appears in the text box when “ON” is set in the “MODE” data field of the label “AL TERNA TE FDR.” at the “COM- PONENT DA T A” display . (Hierarchical Se…

5. Operation Mode

9910-001 3-25 Tg0246-PM-OP

5.4 P.E.C. MANUAL ALIGNMENT MODE Display

• Described below is how to perform the P.E.C. manual alignment operation

after a P.E.C. recognition error has occurred.

When the [P.E.C. MANUAL ALIGNMENT MODE] key is pressed at the

“OPERATION MODE” display, the following display appears on the screen.

Fig. 3.11

When a P.E.C. recognition error has occurred, the fiducial mark position must

be specified through manual alignment operation. “STANDARD” or

“TRACKBALL” can be selected as a manual alignment mode.

STANDARD : When one of the direction keys is selected on the touch screen

(“MANUAL ALIGNMENT” display) and the [MOVE] but-

ton is pressed, the captured image of the component can be

aligned manually.

TRACKBALL : The mark position (a view on the recognition monitor) can

be specified and aligned manually through track ball opera-

tions.

5. Operation Mode

Fig. 3.12

“ALTERNATE FEEDER MODE”

“ENABLE”

This appears in the text box when “ON” is set in the “MODE”

data field of the label “ALTERNATE FDR.” at the “COM-

PONENT DATA” display. (Hierarchical Sequence: “DATA

EDIT” Display → “PATTERN PROGRAM” Display →

“PATTERN PROGRAM EDIT” Display → “COMPONENT

DATA” Display → “COMPONENT DATA EDIT” Display)

“DISABLE”

This appears in the text box when “OFF” is set in the

“MODE” data field of the label “ALTERNATE FDR.” at

the “COMPONENT DATA” display.

[INDV. FDR. ENABLE/DISABLE] Key

When this key is pressed, the “INDIVIDUAL FDR EN-

ABLE/DISABLE” display (Fig. 3.13) appears on the screen.

5.5 ALTERNATE MODE Display

• This display allows the operator to determine whether or not the alternate

feeder mode should be used.

Every time a component shortage error occurs at a feeder, the alternate feeder

mode enables the component pick-up position to be shifted automatically to

another alternative one (specified as the substitute), making it possible for

the machine to perform the operation continuously.

When the [ALTERNATE MODE] key is pressed at the “OPERATION MODE”

display, the following display appears on the screen. (Hierarchical Sequence:

“AUTO OPN. MODE <PLACEMENT>” Display → “AUTO OPN. SUB-

MENU” Display → “OPERATION MODE” Display)

9910-001 3-26 Tg0246-PM-OP

5. Operation Mode

[ENABLE] or [DISABLE] Key

[ENABLE] Key

Select this key to use the alternate feeder mode.

[DISABLE] Key

Select this key not to use the alternate feeder mode.

Note: When “DISABLE” is set, the subsequent alternate

feeder operation is prohibited.

“ALTERNATE OPERATION”

[SUPPLY PRI] Key

Select this key to immediately alternate the feeder to the

one for component replenishment.

[EP DATA]

Select this key to pick up components continuously from

the currently selected feeder.

9910-001 3-27 Tg0246-PM-OP