Programming_mail.pdf - 第251页

V- 61 Programming Manual Part V Inspection Data Step3: Press the Save Data button on the tool-bar or select File > Save Data from the menu-bar. Figure 5-15 Save Data Step4: The dialog shown in Figure 5-16 appears. Pre…

V-60

Programming Manual

Part V Inspection Data

5.4 Save Inspection Data

Set Inspection Selection to Default when saving the inspection data.

Step1: Select Edit > Inspection Selection > Detail Settings form the menu-bar.

NOTE

The same operation can be performed by pressing

Ctrl

Alt

+ .

Figure 5-13 Detail Settings

Step2: The dialog shown in Figure 5-14 appears.

Select Default from the Board Selection and press Apply.

Figure 5-14 Default

V-61

Programming Manual

Part V Inspection Data

Step3: Press the Save Data button on the tool-bar or select File > Save Data from the menu-bar.

Figure 5-15 Save Data

Step4: The dialog shown in Figure 5-16 appears. Press Save to save the inspection data.

In the default setting, the inspection data is saved in D:\BF1\BF1DATA.

To save the data in another destination, check Change destination to save inspection data and

specify the directory to save.

Figure 5-16 Save Inspection Data

V-62

Programming Manual

Part V Inspection Data

5.5 Select Inspection Selection

Here describes settings for Inspection Selection.

Step1: Select File > Select Data from the menu-bar.

Open the inspection data that Inspection Selection is applied.

Figure 5-17 Select Data

Step2: Select Edit > Inspection Selection > Selected Board from the menu-bar.

Figure 5-18 Selected Board