sh030051g.pdf - 第225页

11 - 20 11. OPTIONS AND AUXILI ARY EQUIPMENT (3) Outline drawings (a) MR-J3BUS015M [Unit: mm] (13.4) (2.3) (1.7) (37.65) (15) (6.7) (20.9) Protective tube 0 150 50 0 8 (b) MR-J3BUS03M to MR-J3BUS3M Refer to the table sho…

100%1 / 424
11 - 19
11. OPTIONS AND AUXILIARY EQUIPMENT
11.1.5 SSCNET
cable
POINT
Do not see directly the light generated from CN1A CN1B connector of servo
amplifier or the end of SSCNET
cable. When the light gets into eye, you
may feel something is wrong for eye. (The light source of SSCNET
complies
with class1 defined in JIS C6802 or IEC60825-1.)
(1) Model explanations
Numeral in the column of cable length on the table is a symbol put in the
part of cable model. Cables of
which symbol exists are available.
Cable model
Cable length
Flex life
Application
remark
0.15m 0.3m 0.5m 1m 3m 5m 10m 20m 30m 40m 50m
MR-J3BUS M 015 03 05 1 3 Standard
Using inside
panel standard
cord
MR-J3BUS M-A 5 10 20 Standard
Using outside
panel standard
cable
(Note)
MR-J3BUS
M-B
30 40 50
Long flex
life
Using long
distance cable
Note. For cable of 30m or less, contact our company.
(2) Specifications
Description
SSCNET cable model MR-J3BUS M MR-J3BUS M-A MR-J3BUS M-B
SSCNET cable length 0.15m 0.3 to 3m 5 to 20m 30 to 50m
Optical
cable
(cord)
Minimum bend radius 25mm
Enforced covering cord: 50mm
Cord: 25mm
Enforced covering cord: 50mm
Cord: 30mm
Tension strength 70N 140N
420N
(Enforced covering cord)
980N
(Enforced covering cord)
Temperature range
for use (Note)
-40 to 85
-20 to 70
Ambient
Indoors (no direct sunlight)
No solvent or oil
External appearance
[mm]
2.2 0.07
4.4 0.1
2.2 0.07
6.0 0.2
2.2 0.07
4.4 0.1
4.4 0.4
7.6 0.5
2.2 0.2
Note. This temperature range for use is the value for optical cable (cord) only. Temperature condition for the connector is the same as
that for servo amplifier.
11 - 20
11. OPTIONS AND AUXILIARY EQUIPMENT
(3) Outline drawings
(a) MR-J3BUS015M
[Unit: mm]
(13.4)
(2.3)
(1.7)
(37.65)
(15)
(6.7)
(20.9)
Protective tube
0
150
50
0
8
(b) MR-J3BUS03M to MR-J3BUS3M
Refer to the table shown in (1) of this section for cable length (L).
[Unit: mm]
(100) (100)
L
(Note)
Protective tube
Note. Dimension of connector part is the same as that of MR-J3BUS015M.
(c) MR-J3BUS5M-A to MR-J3BUS20M-A
MR-J3BUS30M-B to MR-J3BUS50M-B
Refer to the table shown in (1) of this section for cable length (L).
SSCNET cable
Distortion dimension [mm]
A B
MR-J3BUS5M-A to MR-J3BUS20M-A 100 30
MR-J3BUS30M-B to MR-J3BUS50M-B 150 50
[Unit: mm]
(A) (A)
L
(Note)
Protective tube
(B)(B)
Note. Dimension of connector part is the same as that of MR-J3BUS015M.
11 - 21
11. OPTIONS AND AUXILIARY EQUIPMENT
11.2 Regenerative options
CAUTION
The specified combinations of regenerative options and servo amplifiers may only
be used. Otherwise, a fire may occur.
(1) Combination and regenerative power
The power values in the table are resistor-generated powers and not rated powers.
Servo amplifier
Regenerative power[W]
Built-in
regenerative
resistor
MR-RB032
[40
]
MR-RB12
[40 ]
MR-RB30
[13 ]
MR-RB31
[6.7 ]
MR-RB32
[40 ]
(Note 1)
MR-RB50
[13
]
(Note 1)
MR-MB51
[6.7
]
MR-J3-10B (1) 30
MR-J3-20B (1) 10 30 100
MR-J3-40B (1) 10 30 100
MR-J3-60B 10 30 100
MR-J3-70B 20 30 100 300
MR-J3-100B 20 30 100 300
MR-J3-200B 100 300 500
MR-J3-350B 100 300 500
MR-J3-500B 130 300 500
MR-J3-700B 170 300 500
Servo amplifier
Regenerative power[W]
Built-in
regenerative
resistor
MR-RB1H-4
[82
]
(Note 1)
MR-RB3M-4
[120
]
(Note 1)
MR-RB3G-4
[47
]
(Note 1)
MR-RB5G-4
[47
]
(Note 1)
MR-RB34-4
[26
]
(Note 1)
MR-RB54-4
[26
]
MR-J3-60B4 15 100 300
MR-J3-100B4 15 100 300
MR-J3-200B4 100 300 500
MR-J3-350B4 100 300 500
MR-J3-500B4 130 300 500
MR-J3-700B4 170 300 500
Servo amplifier
(Note 2) Regenerative power[W]
External regenerative
resistor (Accessory)
MR-RB5E
[6
]
MR-RB9P
[4.5 ]
MR-RB9F
[3 ]
MR-RB6B-4
[20 ]
MR-RB60-4
[12.5 ]
MR-RB6K-4
[10 ]
MR-J3-11KB 500 (800) 500 (800)
MR-J3-15KB 850 (1300) 850 (1300)
MR-J3-22KB 850 (1300) 850 (1300)
MR-J3-11KB4 500 (800) 500 (800)
MR-J3-15KB4 850 (1300) 850 (1300)
MR-J3-22KB4 850 (1300) 850 (1300)
Note 1. Always install a cooling fan.
2. Values in parentheses assume the installation of a cooling fan.