sh030051g.pdf - 第418页

Print Data *Manual N umber Revision Jul. 2007 SH(NA)030051 -C Section 13.5.2 Section 13.6.1(3) Section 13.8.1 Section 13.9.1 Section 13.9.2(5) Section 13.9.3(2) Section 13.9.3(3) Section 13.9.4 Section 13.9.5 Section 13.…

Print Data *Manual Number Revision

Jul. 2007 SH(NA)030051-C Section 11.11(1)

Section 11.12

Section 11.13

Section 11.14

Section 11.18

Section 11.19

Section 11.19(1)

Section 11.19(3)

Section 12.3(1)

Chapter 13

Section 13.1.6(1)

Section 13.1.6(2) (3)

Section 13.1.7

Section 13.3

Section 13.3.1(1) (a)

Section 13.3.1(1) (b)

Section 13.3.1(2) (a)

13.3.1(2) (b)

13.3.2(1), (2)

Section 13.3.4(2)

Section 13.3.6

Section 13.3.7

Section 13.4.3(2) (b)

Section 13.4.3(3)

: Addition of cable diameter for MR-J3-60B4 to 350B4,

addition of Note 3: Cable 5) to 7) of MR-J3-700B(4)

: Addition of MR-J3-60B4 to 350B4 compliant products

Addition of no-fuse breakers, fuses and magnetic

contactors for MR-J3-500B4 and 700B4

: Addition of MR-J3-60B4 to 350B4 compliant products,

unification of (1) and (2)

Addition of power factor improving DC reactors for MR-

J3-500B4 and 700B4 Change of (2) Note2 Addition of

Note3

: Addition of MR-J3-60B4 to 350B4 compliant products

Addition of power factor improving AC reactors for MR-

J3-500B4 and 700B4

: Addition of MR-J3-60B4 to 350B4 as earth leakage

circuit breaker selection example

: Addition of EMC filter for MR-J3-500B4 and 700B4

: Addition of MR-J3-60B4 to 350B4 compliant products,

deletion of Note from TX series

: Addition of TF3005C-TX

: Addition of description for 30kW or more in

“WARNING”, Addition of POINT

: New addition of the details for 30kW or more

Change of notation "magnet contactor" to "magnetic

contactor"

: Change of description "I/O signal connector" to "Digital

I/O connector", addition of rating plate

Change in description of CN3 and CN6

: Change of rating plate designated position

: Enlargement of diagram for removing and reinstalling

terminal block cover

: Addition of POINT: reference "Signal (device)

explanations, section 3.5"

: Revision of magnetic contactor sequence, addition of

Note 3

: Revision of magnetic contactor sequence, addition of

Note 3 and 4

: Revision of magnetic contactor sequence, addition of

Note 3 and 4, addition of magnetic contactor control

(CNP1)

: Revision of magnetic contactor sequence, addition of

Note 3 to 5, addition of magnetic contactor control

(CNP1)

: Change of description in Note for "servo motor output"

and "servo motor power supply" to "servo motor power"

: Correction of reference for CN2 and CN3

: Raise of section 13.3.5 (3) to section 13.3.6

: Raise from section 13.3.6, Change of description in

chart: "servo motor power" to "servo motor power

supply"

: Change of display

: Deletion

Print Data *Manual Number Revision

Jul. 2007 SH(NA)030051-C Section 13.5.2

Section 13.6.1(3)

Section 13.8.1

Section 13.9.1

Section 13.9.2(5)

Section 13.9.3(2)

Section 13.9.3(3)

Section 13.9.4

Section 13.9.5

Section 13.9.7

Section 13.9.8(1) (2)

Appendix 1

Appendix 5

: Deletion of parameter No.PA08 name and initial value

: Deletion of "built-in regenerative register" from

excessive regenerative load warning (A.E0) definition

and cause

: Division of Load ratio graph for MR-J3-

B(4) and MR-

J3-CR55K(4)

: Addition of notation "supplied with converter unit" for

7) and 8)

: Addition of Note

: Revision of connection diagram, change of Note 2,

addition of Note 5

: Addition of mass table

: Deletion of notation for UL/C-UL from body paragraph

: Deletion of Note

: Change of body paragraph

: Change of Iga display range in the diagram

: Change of parameter No.PB17 from “for manufacturer

setting” to “Automatic setting parameter”

Change of parameter No.PC06 from “for manufacturer

setting” to “function selection C-3”

: Update of the “combination of servo amplifier and

servo motor” table

Jun. 2008 SH(NA)030051-D (2)Wiring

: Change of description for “the servo motor will operate

improperly” to “the servo motor will not operate

properly” for the item of connection between the servo

amplifier and the servo motor

Conformance with UL/C-UL standard (3): Change of description

Conformance with UL/C-UL standard (5): Deletion of list of combination with fuse

About the wires used for wiring: Addition of the selected standard temperature

Section 1.2 (1) to (3)

Section 1.3 (1)

Section 1.5 (2)

Section 1.6

Section 1.7.1 (3) (4)

Section 1.8 (3) (4)

Section 2.1 (1) (b)

Section 2.3 (2)

Section 3.1 (5) to (8)

: Change of switch numbers

: Change of description for the mass “2.3” to “2.1”of

MR-J3-200B, Change of pound notation for mass to

three significant digits

: Change of appearance of MR-J3-200B to the same as

MR-J3-200B4

: Addition of models with reduction gear to body

paragraph

: Switch between (3) and (4), Change of the description

for MR-J3-200B to the same as MR-J3-200B4,

Addition of Note 4 to (3).

: Switch between (3) and (4), Change of the description

for MR-J3-200B to the same as MR-J3-200B4,

Addition of Note 4 to (3). Deletion of Note 3 from (4)

Addition of description for FR-BEL to (3)

: Change of description for “Mounting closely is

available for a combination of servo amplifiers of

3.5kW or less in 200V or 100V class.” to “Mounting

closely is available for a combination of servo

amplifiers of 3.5kW or less in 200V or 400W or less in

100V class.”

: Change of description

: Addition of NFB for the fan power cables of the servo

motor’s cooling fan

Print Data *Manual Number Revision

Jun. 2008 SH(NA)030051-D Section 3.2

Section 3.3.3 (1) (a)

Section 3.3.3 (2) (3)

Section 3.7.2 (2)

Section 3.10.2 (3) (a) 1) to

Section 3.10.2 (3) (b)

Section 3.11.2

Section 4.1.2 (1) (c) 2) to

Section 5.2.1

Section 7.4

Section 7.6.3

Section 7.6.4 (1) (a)

Section 7.6.4 (2) (a)

Section 10.1 (5) (6)

Section 10.3.1 (2)

Section 11.1

Section 11.1.1

Section 11.1.2 (2) (b)

Section 11.1.2 (3) (a)

Section 11.1.2 (4)

Section 11.1.2 (5)

Section 11.1.2 (5) (a)

Section 11.1.3 (2)

Section 11.1.4 (2)

Section 11.2 (1)

: Change of Note 15

: Change of CNP2 connector model from “54927-0520”

to “54928-0520”

: Switch between (2) and (3), Change of the description

for MR-J3-200B to the same as MR-J3-200B4

: Addition of description for the condition “Maximum

current: 50mA or less” to body paragraph

: Addition of NFB for fan power cable of servo motor’s

cooling fan, Change of description for Note 1

: Change of servo motor’s terminal diagram

: Change of timing chart

: Change of description for “D terminal” to “C terminal”

: Change of PB06 and PB29 unit for “times” to

“Multiplier(×1)”

: Change of description

: Change of PB06 and PB29 unit for “times” to

“Multiplier(×1)”

: Change of PB06 and PB29 unit for “times” to

“Multiplier(×1)”

: Change of PB06 and PB29 unit for “times” to

“Multiplier(×1)”

: Switch between (5) and (6), Change of the description

for MR-J3-200B to the same as MR-J3-200B4,

Addition of POINT to (5)

: Addition of dynamic brake characteristics of HA-SP,

HA-LP, HC-RP, HC-UP, and HC-LP

: Addition of POINT for protective structure

: Deletion of 2kW from Application, upper stand of 2) in

Table, Change of description for “2kW or less in 400V

class” to “2kW in 200V and 400V class”, Change of

corresponding model from “HF-SP121٠201” to “HF-

SP121 to 301” for 29) in Table, Change of

corresponding model for 30) in Table, Deletion of IP65

from Application, Change of corresponding model for

38) and 40) in Table, Deletion of IP67 from

Application, Deletion of IP67 from Application for 39)

in Table

: Correction of Note position for connecting diagrams

such as MR-EKCBL30M-H

: Addition of description “Crimping tool: 91529-1” in the

list of Junction Connector

: Change of corresponding model of “HF-SP” to “HF-

HA-LP HC-RP HC-UP HC-LP”

: Addition of corresponding model of “HA-LP

HC-

HC-UP HC-LP”

: Change of junction connector of “36110-3000PL” to

“36110-3000FD", Battery connector from “DF3-

EP2428PCFA” to “DF3-EP2428PCA”

: Addition of Note

: Change of built-in regenerative register value of MR-

J3-60B4

100B4 from “15” to “20”, Addition of Note 1