sh030051g.pdf - 第417页

Print Data *Manual N umber Revision Jul. 2007 SH(NA)0300 51-C Section 11.11( 1) Section 11.1 2 Section 11.1 3 Section 11.1 4 Section 11.1 8 Section 11.1 9 Section 11.19(1) Section 11.19(3) Section 12.3(1) Chapter 13 Sect…

Print Data *Manual Number Revision

Jul. 2007 SH(NA)030051-C Section 11.1.1

Section 11.1.2(1)

Section 11.1.2(1) (a)

Section 11.1.2(1) (a) (c)

Section 11.1.2(2)

Section 11.1.2(2) (a)

Section 11.1.2(3) (a) (c)

Section 11.1.2(4) (a)

Section 11.1.2(5) (a)

Section 11.1.4

Section 11.2

Section 11.2(1)

Section 11.2(2) (b)

Section 11.2(3)

Section 11.2(4)

Section 11.2(5) (b)

Section 11.2(5) (c)

Section 11.2(5) (f)

Section 11.3

Section 11.3(3) (b)

Section 11.4

Section 11.4(2)

Section 11.4(3) (b)

Section 11.5(3) (b)

Section 11.5(4) (b) 2)

Section 11.5(6)

Section 11.6(1)

Section 11.6(2)

Section 11.8(1)

Section 11.11

: Change of Application description for No.34 from

“outside panel long distance cable” to “long distance

cable”

Change of connector model

Addition of 2) Connector for 2kW and 3.5kW (400V)

: Deletion of 0.3m from table

: Change of CN2 connection diagram to RoHS compliant

parts

: Addition and change of connector description

: Deletion of 0.3m from table

: Addition and change of connector description

Change of CN2 connection diagram to RoHS compliant

parts

: Addition and change of connector description

: Change of CN2 connection diagram to RoHS compliant

parts

: Addition of connector set

: Deletion of 20 to 30m from table

: Addition of regenerative brake options for MR-J3-500B4

and 700B4

: Addition of regenerative option capable for MR-J3-60B4

to 350B4

: Addition of inverse efficiency and capacitor charging for

MR-J3-350B4

: Addition of parameter setting due to addition of

regenerative option

: Addition of regenerative option MR-RB5G-4

: Addition of regenerative option MR-RB3M-4, MR-

RB3G-4

: Addition of regenerative option MR-RB5G-4

: Addition of regenerative option MR-RB1H-4

: Addition of brake unit for MR-J3-500B4 and 700B4

: Change of description

: Addition of power regeneration converter for MR-J3-

500B4 and 700B4

: Deletion of notation for power supply specification,

change of description in Note 5, addition of Note 6

: Addition of Note 6 to disconnect the wiring of

regenerative brake register in servo amplifier of 7kW or

less

: Addition of Note 8

: Revision of cable diameter for 400V, deletion of Note

: For item: Altitude, vibration, deletion of description

"compliant with JIS"

: Addition of Note 5

: Change of CN3 description Deletion of Note 1

: Addition of MR Configurator compatible version

: Addition of recommended wires for MR-J3-500B4 and

700B4

Print Data *Manual Number Revision

Jul. 2007 SH(NA)030051-C Section 11.11(1)

Section 11.12

Section 11.13

Section 11.14

Section 11.18

Section 11.19

Section 11.19(1)

Section 11.19(3)

Section 12.3(1)

Chapter 13

Section 13.1.6(1)

Section 13.1.6(2) (3)

Section 13.1.7

Section 13.3

Section 13.3.1(1) (a)

Section 13.3.1(1) (b)

Section 13.3.1(2) (a)

13.3.1(2) (b)

13.3.2(1), (2)

Section 13.3.4(2)

Section 13.3.6

Section 13.3.7

Section 13.4.3(2) (b)

Section 13.4.3(3)

: Addition of cable diameter for MR-J3-60B4 to 350B4,

addition of Note 3: Cable 5) to 7) of MR-J3-700B(4)

: Addition of MR-J3-60B4 to 350B4 compliant products

Addition of no-fuse breakers, fuses and magnetic

contactors for MR-J3-500B4 and 700B4

: Addition of MR-J3-60B4 to 350B4 compliant products,

unification of (1) and (2)

Addition of power factor improving DC reactors for MR-

J3-500B4 and 700B4 Change of (2) Note2 Addition of

Note3

: Addition of MR-J3-60B4 to 350B4 compliant products

Addition of power factor improving AC reactors for MR-

J3-500B4 and 700B4

: Addition of MR-J3-60B4 to 350B4 as earth leakage

circuit breaker selection example

: Addition of EMC filter for MR-J3-500B4 and 700B4

: Addition of MR-J3-60B4 to 350B4 compliant products,

deletion of Note from TX series

: Addition of TF3005C-TX

: Addition of description for 30kW or more in

“WARNING”, Addition of POINT

: New addition of the details for 30kW or more

Change of notation "magnet contactor" to "magnetic

contactor"

: Change of description "I/O signal connector" to "Digital

I/O connector", addition of rating plate

Change in description of CN3 and CN6

: Change of rating plate designated position

: Enlargement of diagram for removing and reinstalling

terminal block cover

: Addition of POINT: reference "Signal (device)

explanations, section 3.5"

: Revision of magnetic contactor sequence, addition of

Note 3

: Revision of magnetic contactor sequence, addition of

Note 3 and 4

: Revision of magnetic contactor sequence, addition of

Note 3 and 4, addition of magnetic contactor control

(CNP1)

: Revision of magnetic contactor sequence, addition of

Note 3 to 5, addition of magnetic contactor control

(CNP1)

: Change of description in Note for "servo motor output"

and "servo motor power supply" to "servo motor power"

: Correction of reference for CN2 and CN3

: Raise of section 13.3.5 (3) to section 13.3.6

: Raise from section 13.3.6, Change of description in

chart: "servo motor power" to "servo motor power

supply"

: Change of display

: Deletion

Print Data *Manual Number Revision

Jul. 2007 SH(NA)030051-C Section 13.5.2

Section 13.6.1(3)

Section 13.8.1

Section 13.9.1

Section 13.9.2(5)

Section 13.9.3(2)

Section 13.9.3(3)

Section 13.9.4

Section 13.9.5

Section 13.9.7

Section 13.9.8(1) (2)

Appendix 1

Appendix 5

: Deletion of parameter No.PA08 name and initial value

: Deletion of "built-in regenerative register" from

excessive regenerative load warning (A.E0) definition

and cause

: Division of Load ratio graph for MR-J3-

B(4) and MR-

J3-CR55K(4)

: Addition of notation "supplied with converter unit" for

7) and 8)

: Addition of Note

: Revision of connection diagram, change of Note 2,

addition of Note 5

: Addition of mass table

: Deletion of notation for UL/C-UL from body paragraph

: Deletion of Note

: Change of body paragraph

: Change of Iga display range in the diagram

: Change of parameter No.PB17 from “for manufacturer

setting” to “Automatic setting parameter”

Change of parameter No.PC06 from “for manufacturer

setting” to “function selection C-3”

: Update of the “combination of servo amplifier and

servo motor” table

Jun. 2008 SH(NA)030051-D (2)Wiring

: Change of description for “the servo motor will operate

improperly” to “the servo motor will not operate

properly” for the item of connection between the servo

amplifier and the servo motor

Conformance with UL/C-UL standard (3): Change of description

Conformance with UL/C-UL standard (5): Deletion of list of combination with fuse

About the wires used for wiring: Addition of the selected standard temperature

Section 1.2 (1) to (3)

Section 1.3 (1)

Section 1.5 (2)

Section 1.6

Section 1.7.1 (3) (4)

Section 1.8 (3) (4)

Section 2.1 (1) (b)

Section 2.3 (2)

Section 3.1 (5) to (8)

: Change of switch numbers

: Change of description for the mass “2.3” to “2.1”of

MR-J3-200B, Change of pound notation for mass to

three significant digits

: Change of appearance of MR-J3-200B to the same as

MR-J3-200B4

: Addition of models with reduction gear to body

paragraph

: Switch between (3) and (4), Change of the description

for MR-J3-200B to the same as MR-J3-200B4,

Addition of Note 4 to (3).

: Switch between (3) and (4), Change of the description

for MR-J3-200B to the same as MR-J3-200B4,

Addition of Note 4 to (3). Deletion of Note 3 from (4)

Addition of description for FR-BEL to (3)

: Change of description for “Mounting closely is

available for a combination of servo amplifiers of

3.5kW or less in 200V or 100V class.” to “Mounting

closely is available for a combination of servo

amplifiers of 3.5kW or less in 200V or 400W or less in

100V class.”

: Change of description

: Addition of NFB for the fan power cables of the servo

motor’s cooling fan