SM482PLUS_Admin(Eng_Ver2.8).pdf - 第166页
6-48 Multi-Functional Placer SM482( L) PLUS Administrator’s Guide 6.6.3. Manual 2D Barcode Confirm Dialog Box If 2D barcode recognition error occurs during automatic pr oduction when using the 2D barcode function, pressi…
6-47
Board Definition
<Light > group
Sets the light value when checking the barcode. Generally, it is set to 5. However,
adjust it appropriately according to the state of the barcode.
<Test> button
Checks if the read barcode data can be used. If the test is successfully performed,
the following window is displayed.
If the test fails, the following window is displayed.
<Update> button
Save the array setup data and close the “Barcode Position” dialog box.
<Cancel> button
Close the “Barcode Position” dialog box without saving the array setup data.
6-48
Multi-Functional Placer SM482(L) PLUS Administrator’s Guide
6.6.3. Manual 2D Barcode Confirm Dialog Box
If 2D barcode recognition error occurs during automatic production when using the 2D
barcode function, pressing the ‘Stop’ Button on the machine operation panel will display
the screen for processed errors as follows.
Memo In order to enable the following screen, the system constant setup
must be preceded. If you want to take measures against the error
during automatic production, please contact our CS or local
representative office.
Figure6.11 Manual 2D Barcode Confirm Dialog Box
<Enter> button
Move the teaching camera on the barcode using the jog box and click this Button to
select the new barcode position.
<Retry> button
Execute the ‘Barcode Position’ dialog box to re-teach the barcode position and
perform the recognition test. For more details, refer to “6.6.2 Barcode Position”.
<Manual Confirmation> Area
You can correct recognition errors by manually entering 2D barcode information.
6-49
Board Definition
<Confirm> Button
You can manually enter the 2D barcode ID by entering the 2D barcode
information in the edit box above and clicking this button.
Warning You must enter the accurate 2D barcode information since
the equipment will freeze and stop production once it
receives the ‘Cannot Proceed’ command from the MES
server due to incorrect input.
If the 2D barcode recognition fails after manual processing, remove the corresponding
PCB manually.
Warning If you remove the board manually or take measures against
the error while the machine is in ready state, you may get
injured. Release the ready state and manually remove the
board or take measures against the error while the machine
is in idle state.