SM482PLUS_Admin(Eng_Ver2.8).pdf - 第56页
1-8 Multi-Functional Placer SM482( L) PLUS Administrator’s Guide 2. Then the following dia log box appears. 3. The setup with the manager mode is made in the following manner .. (1) Select the <Manager> option Butt…
1-7
Operation Mode and Password Change
1.1.2. Setting Manager Mode
The system manager password is needed to use the system setup menu. Access with
system manager and the password setup must be done in the following manner.
When accessing with system manager and setting up the password, perform access and
setup as follows.
When accessing with system manager, perform access as follows.
1. Click the ‘Operation Mode Change’ Button in the submenu
ETC Language
○○○○
About
○○○○
Help
○○○○
Menu bar Sub Toolbar
Operator/
Leader
Programmer
Manager
Service
1-8
Multi-Functional Placer SM482(L) PLUS Administrator’s Guide
2. Then the following dialog box appears.
3. The setup with the manager mode is made in the following manner..
(1) Select the <Manager> option Button in the <Select Operation Mode> group
(2) Enter the manager password in the <Password> editor box.
(3) Click the <OK> button.
1-9
Operation Mode and Password Change
1.2. Changing Password
Except for the plain users, each user mode has a password. The password is needed to set
each user mode. The password must be set within 8 characters.
Caution Do not share the programmer mode and manager mode
with the users other than the corresponding users. Damage
may be caused by the incorrect operation of the MMI by the
unauthorized user in the programmer mode or manager
mode.
Select the ‘Operation Mode Change’ Button in the menu-toolbar in the System
Manager Mode.