SM482PLUS_Admin(Eng_Ver2.8).pdf - 第451页
14-79 Machine Calibration 14.3.7.11. Beam Offset Calibration Refers to the calibration measuring the distan ce between the fiducial camera sensor and beam sensor . In order to measure the beam of fset, the beam sensor to…
14-78
Multi-Functional Placer SM482(L) PLUS Administrator’s Guide
10. .If the calibration procedure is completed for all heads normally, the result is displayed
as shown in the following figure.
11. The measurement result can be confirmed in the R Axis dialog box.
Memo The reference values for the calibration of the R-Axis Offset is as
follows.
Real Max(Min): The Max.(Min.) offset between command value
and calibration value
Head1~Head6 : -0.500 ~ 0.500(deg)
Err Max(Min) The Max.(Min.) offset between compensation
value and calibration value
Head1~Head6 : -0.200 ~ 0.200(deg)
14-79
Machine Calibration
14.3.7.11. Beam Offset Calibration
Refers to the calibration measuring the distance between the fiducial camera sensor and
beam sensor. In order to measure the beam offset, the beam sensor to be used in the
<Head> tab of the System menu must be selected first.
Perform calibration of the Beam Offset in the following manner
1. Press the <16. Beam Offset> button to execute the beam offset dialog box.
2. Select the gantry to be calibrated.
3. After selecting the Fid Cam2 (or Fid Cam4) as a teaching camera, move the X-Y axes
to the area (a point that can be distinguished by SMVision) which can be recognized
using the jog box.
4. Press the <Get> button to save the current position in the <Teaching Position>.
14-80
Multi-Functional Placer SM482(L) PLUS Administrator’s Guide
5. Select Beam 1 (or Beam 2) as a teaching tool and move it to the <Teaching Position>
using the jog box.
6. Press the <Get> button to save the current position in the <Beam Position>.
7. Select Gantry 2 in the <Gantry> combo box and perform calibration in the same
manner as was done for Gantry 1.
8. Press the <Update> button to save the setups.
9. You can check the result value in the Head Offset dislog box of the System Setup
menu.