SM482PLUS_Admin(Eng_Ver2.8).pdf - 第496页

15-42 Multi-Functional Placer SM482( L) PLUS Administrator’s Guide  <1D Barcode Info with workta ble> Check Box Select this to transfer 1D barcode in formation from the machine that uses the 1D scanner installed o…

15-41

System Setup

 <Transporter> button

In the in-line system composed of several machines, this function allows reduction of

the time taken for the next machine to recognize the board information recognized and

transmitted by the previous machine, from the first to the last machine.

 <Use Board Info Transfer> check box

In order to use the board information transmitted from the previous machine,

select this check box. Then select the board information to be used from the

enabled <Option Slave> group.

 <Generate Board Info> check box

In order to set the board information to be transmitted to the next machine, select

this check box. Then select the board information to be created from the enabled

<Option Slave> group.

 <Option> group

 <Bad Mark Info> check box

In order to transmit bad mark information to the next machine, select this

check box. Once this information has been transmitted to the next machine,

the next machine performs work without recognizing the bad marks.

 <Fiducial Info> check box

For array PCBs, select this check box in order to transmit fiducial mark

information on each array to the next machine. Once this information has been

transmitted to the next machine, the next machine performs work recognizing

only the global fiducial mark of the array PCB.

 <Height Info> check box

If there is a height sensor, it is possible to measure the height of the upper

surface of the PCB. Select this box in order to transmit information regarding

the height of the upper surface of the PCB to the next machine.

15-42

Multi-Functional Placer SM482(L) PLUS Administrator’s Guide

 <1D Barcode Info with worktable> Check Box

Select this to transfer 1D barcode information from the machine that uses the

1D scanner installed on the work table to the next machine. This will be

synced with external MES systems such as the iTAC program. For more

details regarding this matter, contact us.

 <1D Barcode Info with internal scanner> Check Box

Select this to transfer 1D barcode information from the machine that uses the

1D scanner installed on the machine to the next machine. This will be synced

with external MES systems such as the iTAC program. For more details

regarding this matter, contact us.

 <Change Authority> button

Sets the authorization level of a user. The currently applied authorization level setup

function is used by default. However, if an operator plays the role of a programmer, it

is possible to perform setup to allow the operator to use some functions used with the

authorization level of the programmer.

 <Update> button

Saves the setup and closes the dialog box.

 <Cancel> button

Neglects the setup and closes the dialog box.

 <Default> button

Recovers the setup to the default (recommended) setup in the machine.

15-43

System Setup

 <PCB Edit> Tab

Sets the authorization level for the submenus of the <PCB Edit> menu.

 <Product> Tab

Sets the authorization level for the submenus of <Product> menu.

 <Utiliy> Tab

Sets the authorization level for the submenus of <Utility> menu.

 <Diagnosis> Tab

Sets the authorization level for the submenus of the <Diagnosis> menu.

 <SysSetup> Tab

Sets the authorization level for the submenus of <Sys.Setup> menu..

 <Tools Menu> Tab

Sets the authorization level for the submenus of <Tools Menu> menu.

 <File Menu> Tab

Sets the authorization level for the submenus of <File Menu> menu.

The authorization setup can be used only for the Service mode or higher. It is set up by

checking or releasing the check of the check box for the corresponding item in the

Setup screen..

Submenus of the corresponding menu are enabled or disabled as shown below

according to the setup performed in the Setup menu. The disabled menu cannot be

used.

1: User authorization level setup menu

2: User authorization level release menu

 <Telemetry Auto Save> check box

Selecting this check box will allow the Telemetry Log file to be saved automatically

when an emergency condition occurs. The name of the folder and file for default

saving is “C:SmartSM\Log\Machine Type_SW Version_Machine Unit