SM482PLUS_Admin(Eng_Ver2.8).pdf - 第198页

7-26 SM PLUS Administrator’s Guide The following shows the electrode type of lead. The following shows that the obj ect type is the lead group.  <T ype> com bo box Selects the type of the lead to be recognized.  …

7-25

Part Registration

In order to adjust the size of the round dot so that it can be easily selected on the

machine's panel, adjust the size using the combo box at the bottom left of the

vision window.

 <Width> edit box

Input the width of an object to suit the image of an actual part. If the selected

object is round, input the diameter.

 <Height> edit box

Input the height of an object to suit the image of an actual part. Only when the

selected object is rectangular is this enabled.

 Lead/ Lead Group

Edits a lead shape to a defined object or deletes it.

The following shows the Gull Wing, J Lead and Land types of leads.

The following shows the coil type of lead.

7-26

SM PLUS Administrator’s Guide

The following shows the electrode type of lead.

The following shows that the object type is the lead group.

 <Type> combo box

Selects the type of the lead to be recognized.

 Gull Wing: Bent outward, such as SOP and QFP.

 J Lead: Bent inward, such as SOJ and PLCC.

 LAND: Exists inside the body, such as QFN.

 Coil: Applies a coil algorithm, such as Chip-Rect (Coil).

 Electrode: Recognizes a pad, such as a rectangular chip part.

 <Shape> combo box

Selects the lead shape.

 When the lead is of Gull Wing, J Lead and Land types.

Select the shape most similar to the lead shape.

7-27

Part Registration

Shape definition - Lead (Rectangle)

1: Lead width change (Pitch not to be changed)

2: Lead Length change (Pitch not to be changed)

Shape definition - Lead (Roof)

1: Lead width change (Pitch not to be changed)

2: Lead Length change (Pitch not to be changed)

3: Foot length change

Shape definition - Lead (Fork)

1: Lead width change (Pitch not to be changed)

2: Lead Length change (Pitch not to be changed)

3: Foot length change