SM482PLUS_Admin(Eng_Ver2.8).pdf - 第284页
8-32 Multi-Functional Placer SM482( L) PLUS Administrator’s Guide <Use JEDEC DB> This function facilitates te aching using JEDEC DB. <Select> button This brings up the information on the tray that will be…
8-31
Feeder Setup
(5) Click <Get Pitch …> button to obtain the pitch interval between the
pockets.
Caution Be sure to perform in the order of “
(2)
>
(3)
>
(4)
>
(5)
”as
described above.
(6) Within the maximum moving distance the fiducial camera can reach,
select the pocket on which pitch teaching will be done. Selecting the
pocket located farther from the first pocket ensures higher accuracy of
pitch value.
Enter the NX and NY, the pocket interval from the first pocket to the pitch
teaching pocket.
NX =Row number of the pocket to be taught - 1
NY =Column number of the pocket to be taught - 1
(7) Input the pocket position by clicking the <Get> button.
(8) The final pitch can be obtained as follows by clicking the <Apply> button.
However, the pitch can be directly entered skipping the steps of (6)~(8)
when the pocket pitch is already known.
8-32
Multi-Functional Placer SM482(L) PLUS Administrator’s Guide
<Use JEDEC DB>
This function facilitates teaching using JEDEC DB.
<Select> button
This brings up the information on the tray that will be worked on from the
JEDEC tray DB.
Selecting this button will launch the <JEDEC DB Viewer> dialog box.
<Description> Caption box
The style and size of the tray.
< Offset> Caption box
It means offset value of X, Y, Z.
<Pitch> Caption box
The distance between the centers of the parts in the pallet.
<PickZ> Caption box
Sets the height of the Z axis when picking up parts supplied from the
pallet.
<Number of Pockets> Caption box
The number of pockets in the palette.
<Pocket Size> Caption box
Pocket size of the tray.
8-33
Feeder Setup
<Tray Size> Caption box
The size of the tray. This means the size excluding the individual width of
the side of the pallet.
<Slave width> Caption box
It means the wing width on the side of the pallet.
<Seated on Body> Caption box
This function is not supported by this equipment.
<Add> button
It is a function to generate new JEDEC Tray.
<Edit> button
This is a function that can modify existing JEDEC Tray defined.
<Delete> button
This function allows you to delete an existing defined JEDEC Tray.
<Pocket Center1 > Caption Box
Indicates offset of X plus slave width.
<Pitch> Caption box
Indicates the X, Y Pitch value.
<Set Array> button
(For array PCBs) Sets the offset value between the home position of the small PCB in
each array PCB and the placement home position of the array PCB.
<Unit> group
Select the tray unit to edit.
Button selects the previous unit, Button selects the next unit.
<Unit Type> caption box
Displays the type of selected tray unit. The type of the corresponding tray unit should
be set in the system.
<Use 2 Tray> check box
Check this check box when using 2 trays on a pallet. This function is not applied to
this machine.
<Teach> group
Used for moving the selected object to the assigned position of coordinates by rotating
XY axis driving motor, or for obtaining the present coordinates of the selected object.