SM482PLUS_Admin(Eng_Ver2.8).pdf - 第32页

Multi-Functional Placer SM482( L) PLUS Administrator’s Guide xviii  Mass T ype Mass (kg) Remarks SM482PLUS (S tandard 2 Feeder base) 1,575 Height=900mm The mass which does not include the Feeder . 1,635 Height=950mm The…

100%1 / 604
Preface
xvii
Mechanical Specifications
Size and mass of the machine
Height (Under the condition that the height of the PCB upper surface is 900 mm)
1: Up to the upper surface of signal light (2,090 mm)
2: Length (1,650 mm_L460 mm Conv., 1,990mm_L610 Conv., 2,140mm_L660 Conv., 1,850mm_L1,200
Conv.)
3: Width (1,680mm_Including front/rear cover, 2,030mm_Including operation unit)
4: Up to the upper surface of cover (1,530 mm)
Multi-Functional Placer SM482(L) PLUS Administrator’s Guide
xviii
Mass
Type Mass (kg) Remarks
SM482PLUS
(Standard 2 Feeder base)
1,575
Height=900mm
The mass which does not include
the Feeder.
1,635
Height=950mm
The mass which does not include
the Feeder.
SM482PLUS
(2 Docking Option)
1,545
Height=900mm
The mass which does not include
the Docking Cart and Feeder.
1,605
Height=950mm
The mass which does not include
the Docking Cart and Feeder.
SM482PLUS
(1 Standard Feeder base
+ 1 Docking Option)
1,560
Height=900mm
The mass which does not include
the Docking Cart and Feeder.
1,620
Height=950mm
The mass which does not include
the Docking Cart and Feeder.
SM482PLUS
(Front 1 feeder base)
1,535
Height=900mm
The mass which does not include
the Feeder.
1,595
Height=950mm
The mass which does not include
the Feeder.
SM482PLUS
(Front 1 Docking Option)
1,520
Height=900mm
The mass which does not include
the Docking Cart and Feeder.
1,580
Height=950mm
The mass which does not include
the Docking Cart and Feeder.
Preface
xix
Switching of Operation Panel
Figurei.5 Operation Panel
Switching operation on the operation panel is described below.
Main switch
Has a function of supplying or stopping the main power to the machine. Power is
supplied to a controller by turning the switch. A power lamp is lighted and a working
screen is shown on the programming monitor after a short delay. During the initial
stage, power is not turned on for the drivers such as motor. The power should be
turned off only after terminating the MMI. If the power is suddenly turned off, the data
and the main body may be damaged and the machine malfunction may occur at the
next power up.