SM482PLUS_Admin(Eng_Ver2.8).pdf - 第186页
7-14 SM PLUS Administrator’s Guide 7.2.2.1. ESSENTIAL Of general common parameters, sets the mandatory parame ters that the user must check and set. 1: P art T y pe Set up 2: Feeder/Nozzle Setup 3: Setup of Other Options…
7-13
Part Registration
7.2.2. Edit Part Parameter
It is possible to set the parameters related to part recognition as well as the parameters
related to feeders, nozzles, pneumatic pressure and speed.
7-14
SM PLUS Administrator’s Guide
7.2.2.1. ESSENTIAL
Of general common parameters, sets the mandatory parameters that the user must check
and set.
1: Part Type Setup
2: Feeder/Nozzle Setup
3: Setup of Other Options
<Part Category Property> group
Set the size of the part to be registered.
Leadless and odd form parts
<Body Width/Length>: Part size in the X/Y direction
<Thickness>: Part thickness
<Lead Width>: Lead width
7-15
Part Registration
<Lead Length>: Lead length
Ball Part
<Body Width/Length>: Part size in the X/Y direction
<Thickness>: Part thickness
<Number of X/Y Balls>: Number of balls in the X/Y direction
<Ball Pitch X/Y>: X/Y distance from the a ball center to the center of an
adjacent ball
<Ball Diameter>: Diameter of a ball
Leaded Part
<Overall Width/Length>: Distance of lead in the X/Y direction
<Body Width/Length>: Part body size in the X/Y direction
<Thickness>: Part thickness
<Lead Num (Up/Down/Left/Right)>: Number of leads in the top/bottom/left/
right direction
<Lead Width (Up/Down/Left/Right)>: Lead width
<Lead Length (Up/Down/Left/Right)>: Lead length
<Lead Pitch (Up/Down/Left/Right)>: Pitch between leads
<X/Y Lead Num>: Number of leads at one side in the X/Y direction
<Lead Foot>: Length through which the lead contacts with the bottom surface