Administrator’s Guide(CP45FV) Eng.pdf - 第19页
Pr eface v Rear V iew of the Machine The following labels are attached on the rear part of this machine. Figur e 0-2. Safety labels attached on the r ear part of the machine Do not put a hand in during operation. Part …
Samsung Component Placer CP45FV Series Administrator’s Guide
cau
Do not use the embedded PC(HDD) for
personal usage.
It could cause serious troubles.
As high voltage flows inside the cover
and in the area near the switch, take
precautions against electric shock. Be
sure to turn off the main switch in the
right lower cover of the rear side before
maintenance or repair.
Remove the handler before automatic
operation.
Caution: Safety Colors and Contrast Colors
Combination of Safety yellow and black may be
used to indicate temporary or permanent ris
k
locations. – locations where there is moving
part(Conveyor).
Do not remove the safety device. It could
se personal injuries or serious
problems.
iv
Preface
v
Rear View of the Machine
The following labels are attached on the rear part of this machine.
Figure 0-2. Safety labels attached on the rear part of the machine
Do not put a hand in during operation.
Part where this label is attached contains
moving parts, it is very dangerous if the use
r
disassembles any part or open the cover when
the moving part is maneuvering.
Stop the machine before servicing.
Stop the machine before repair or maintenance
or error troubleshooting.
If the cover is removed from the area
where this label is attached, it could
result in an electric shock.
When it is necessary to remove the
cover for repair or maintenance, turn of
f
the main switch in the left lower cover of
the rear side, wait a little while, and
remove the cover.
Samsung Component Placer CP45FV Series Administrator’s Guide
Turn off the main switch in the left lower
cover of the rear side and disconnect air
before maintenance or repair.
Caution: Safety Colors and Contrast Colors
Combination of Safety yellow and black may be
used to indicate temporary or permanent ris
k
locations. – locations where there is moving
part(Conveyor).
vi