Administrator’s Guide(CP45FV) Eng.pdf - 第252页

Samsung Component Placer CP45FV Administrator ’ s Guide 15.2. Camera [F8] Sets various data on the camera and performs cam era calibration. Figur e 15-3. “ Sys. Setup : Camera Setting – Move Camera ” di alog box <Came…

Machine Calibration

15-13

When using the FOV

15mm Fly Camera

When using the FOV

25mm Fly Camera

Samsung Component Placer CP45FV Administrator’s Guide

15.2. Camera [F8]

Sets various data on the camera and performs camera calibration.

Figure 15-3. “Sys. Setup : Camera Setting – Move Camera” dialog box

<Camera Select> option button group 

Select the camera type to set. Available camera types are as follows.

Move Camera : Camera used for position teaching or fiducial mark check.

Fix Camera : Camera used for component check, it is fixed on the feeder lane.

Fly Camera : Camera used for component check, it is attached to each head.

<Camera No> option button 

Selects the camera number for each camera type.

For the move camera, no.1, for the fix camera, nos. 1-3, and for the fly camera nos.1-

6 can be selected.

Above screen is the case where the camera type is set to “Move Camera”.

Warning

Operation error caused by unauthorized or untrained

personnel or insufficient checking before calibration could

severely damage the machine

or the set up data, or it could cause personal injury of the

operator or the worker near the machine.

Before carrying out calibration, check the item to be

calibrated and check if there is any worker near the

machine.

And calibration must be carried out by an authorized and

trained user only.

15-14

Machine Calibration

15-15











<Calibration Data> group

Sets the camera calibration data. It can either be set directly or by using the

calibration function.

<X> edit box

Set the resolution of the camera in X direction. The unit used is the number of

pixels per mm.

<Y> edit box

Set the resolution of the camera in Y direction. The unit is the number of pixels

per mm.

<R> edit box

Set the resolution of the camera in R direction. The unit is degree.

<Offset> group

Set the camera offset data.

<X> edit box

Set the offset value of the camera in X direction.

<Y> edit box

Set the offset value of the camera in Y direction.

<R> edit box

Set the offset value of the camera in R direction.

<Default Light> group

Set the default light value.

Next screen is the case where the camera type is set to “Fix Camera”.

<Calibration Data> group 

Set the camera calibration data. It can be set directly or by using the calibration