Administrator’s Guide(CP45FV) Eng.pdf - 第69页

Boar d Definition 6-9 Figur e 6-10. Scr een showing second point teaching for Array PCB Offset T each the origin of the Array PCB on the position that can determine the offset. When the “ Enter ” key is pressed after tea…

Samsung Component Placer CP45FV Series Administrator’s Guide

Initializes the Array PCB. This function sets the offset value of each Array PCB

automatically when the arrangement of array PCB is regular.

<Number> edit box group 

Enter the number of Array PCBs as follows.

X=3

Y=2

<Count Direction> option button group 

Select a method of numbering Array PCBs.

XDir

인경우

123

YDir

인경우

135

When the X Direction is selected When the Y Direction is selected

<Offset> edit box group 



This value is used to set the offset value of the origin of Array PCB

automatically. It sets the placement origin of small PCBs in the array PCB by

increasing the coordinate as much as the offset from the placement origin of

the small PCB, which becomes the reference in the array PCB.

<Teach> button

This button is used to teach the offset value of Array PCB in the same way as

teaching the PCB size. When this button is clicked on, the following screens

are displayed in succession.

Figure 6-9. Screen showing first point teaching for Array PCB Offset

Teach the origin of Array PCB 1. When the “Enter” key is pressed after

teaching, the following screen is displayed.

6-8

Board Definition

6-9

Figure 6-10. Screen showing second point teaching for Array PCB Offset

Teach the origin of the Array PCB on the position that can determine the

offset. When the “Enter” key is pressed after teaching, the following screen is

displayed.

Figure 6-11. Screen showing completion of Array PCB Offset Teaching

Press the “Enter” key to complete the Array PCB offset value teaching

operation.

<Apply> button 



Automatically creates Array PCB data with the value set in this group.

<5. Add Value> group

Set the values of X, Y, and R to be added to the grid line of the <1. Array> group.

When the “Add” button is clicked on after setting the desired values, the values

are added to the corresponding grid lines.

<Array Skip/Work Tools> group

All Skip: Set “Skip” for all of the array PCBs.

All Work(No Skip): Release ‘Skip’ settings for all of the array PCBs.

Skip: Set the ‘Skip’ for the array PCB having the number that is inputted in the

‘Array No’.

Work Release ‘Skip’ setting for the array PCB having the number that is inputted

in the ‘Array No’.

<OK> button

Saves the edited data and closes the screen.

<Cancel> button

Samsung Component Placer CP45FV Series Administrator’s Guide

Closes without saving the edited data.

<Fiducial Mark…> button 

If there is a fiducial mark on the PCB, set the position of the fiducial mark and mark

data. When this button is clicked on, the following dialog box is displayed.

Figure 6-12. “Fiducial Position & Mark” dialog box (When the Position Type is “None”)

<1. Position Type> combo box 

Select the number of fiducial marks. Available numbers are as follows.

None: No fiducial mark.

1 Panel: 1 fiducial mark for PCB correction.

2 Panel: 2 fiducial marks for PCB correction.

3 Panel: 3 fiducial marks for PCB correction.

1 Array: 1 fiducial mark for Array PCB correction in each Array PCB.

2 Array: 2 fiducial marks for Array PCB correction in each Array PCB.

3 Array: 3 fiducial marks for Array PCB correction in each Array PCB.

<2. Mark Position> group 

If <Position Type> is not “None”, the number of data corresponding to the

number of fiducial marks selected are generated. For example, when “2 Panel” is

selected, the following dialog box is displayed.

6-10