Administrator’s Guide(CP45FV) Eng.pdf - 第51页

V iew Menu Chapter 4. V iew Menu 4-1 The <V iew> menu is composed of the six submenus: Manual T ool, Current Position, System Error Message, Dump Information, T ool bar Position, Mark3TSG . When a submenu of <V …

View Menu

Chapter 4. View Menu

4-1

The <View> menu is composed of the six submenus: Manual Tool, Current Position,

System Error Message, Dump Information, Tool bar Position, Mark3TSG.

When a submenu of <View> menu is selected, check mark() appears in front of the

submenu (except for some commands), and the corresponding message box is displayed

on the main screen. If the menu is selected again, the check mark disappears and the

corresponding message box also closed.

Figure 4-1. View Menu and Submenus

4.1. Manual Tool

Executes a manual operation of the machine. When this command is selected, the

following dialog box is displayed.

4.1.1. Axis Moving Dialog Box

Used to move or to get the current position coordinates of each motor-axis.

Figure 4-2. “Manual Tools – Axis Moving” dialog box

Axis combo box 

Samsung Component Placer CP45FV Series Administrator’s Guide

Select the axis to move. Available axes are as follows.

XY: Selects XY axis.

Z: Selects the Z axis of the head.

R: Selects the R axis of the head.

Mirror: Selects the mirror axis of the fly camera.

Width: Selects the axis of the conveyor width.

<Head Device> combo box 



To move to the axis selected in the <Axis> combo box or to get the coordinates,

select the corresponding device. Available devices are as follows.

Move Cam: Selects Teaching Camera.

Head1: Selects Head1.

Head2: Selects Head2.

Head3: Selects Head3.

Head4: Selects Head 4.

Head5: Selects Head5.

Head6: Selects Head6.

<Speed Level> group

Select the speed level while driving motor-axis.

Available speed levels are as follows.

1: Selects the fastest level of speed. (Fastest)

2: Selects the fast level of speed. (Fast)

3: Selects the middle level of speed. (Middle)

4: Selects the slow level of speed. (Slow)

5: Selects the slowest level of speed. (Slowest)

<Position> group

To move the axis or to get the coordinates of the current motor-axis, display the

position value. The displayed position value differs according to the axis selected in

<Axis>.

The position values are as follows.

X: The position value of X axis.

Y: The position value of Y axis.

<Origin> combo box

To move or to get the coordinates of the current motor-axis, select the origin.

Available origins are as follows.

Machine Logical: Selects the origin of the machine as the origin.

FeederBase Front (1): Selects the origin of the front feeder base as the origin.

FeederBase Rear (2): Selects the origin of the rear feeder base as the origin.

Displays the information generated during the manipulation of axis.

<Move> button

Moves the axis to the value specified in the <Position> group.

4-2