Administrator’s Guide(CP45FV) Eng.pdf - 第312页
Samsung Component Placer CP45FV Administrator ’ Guide Figur e 18-5. . “ Open ” dialog box 18.4. File Man…[F5] Figur e 18-6. “ File Manager ” dialog box <Select File Attribute:> group When the extension file…
Utility
18-3
18.2. Pd. Info[F3]
Displays the production management data. Please refer to “19.1 Production Information
Management(Page 19-1)”.
18.3. Copy…[F4]
The <Copy data between PCB files> command performs the similar function as
the<Browse> function of the <New> command, but it does not create a new PCB file. A
preexisting file is copied to a designated PCB file.
When the <Copy data between PCB file> command is selected, the following dialog box
is displayed.
Figure 18-4. “Copy data between PCB files” dialog box
<Source File> edit box
The source file to be copied. The source file name can be selected by entering the
name of the source file directly or by clicking on the <Browse...> button on the right.
<Browse…> button
Displays the location of the source file to be copied. When this button is clicked on,
the following dialog box is displayed.
Samsung Component Placer CP45FV Administrator’ Guide
Figure 18-5. . “Open” dialog box
18.4. File Man…[F5]
Figure 18-6. “File Manager” dialog box
<Select File Attribute:> group
When the extension file button in the Select File Attribute group is clicked, the
corresponding contents are indicated in the list.
<Send To A:> button
Copies the selected file on a floppy disk.
<Copy> button
Makes a copy of the selected file and as the original file exists under its original name,
saves the copied file under a different file name when using the copy command.
<Move> button
18-4
Utility
18-5
Moves the selected file to the specified directory.
<Delete> button
Deletes the selected file.
<Rename> button
Renames the selected file
<Clear> button
If the file size of a *.log file is very big, deletes the data saved previously.
18.5. Bypass[F8]
The <Bypass> command is used to bypass a PCB on the conveyor without carrying out
placement operation. When this command is selected, the following dialog box is
displayed and shows it is in the PCB Bypass status.
If the head is above the conveyor, the PCB sensing sensor gets affected. Therefore, move
the head out of the conveyor and execute the command.
Figure 18-7. . “By-pass Operation” dialog box
When the <Start> switch on the main body of this machine is pressed, starts the PCB
bypass operation. When the <Stop> switch or <Reset> switch on the main body of this
machine is pressed, cancels the PCB bypass operation status and closes the dialog box.