Administrator’s Guide(CP45FV) Eng.pdf - 第38页

Samsung Component Placer CP45FV Series Administrator ’ s Guide Checks the overall operation of the System. 2.1.2.2.3. The submenu tool-bar s of the Utility menu tool-bar Print                 Used to prin…

100%1 / 321
Structure of MMI Menu
2-3
information.
2.1.2.2. Main menu tool-bars
2.1.2.2.1. The submenu tool-bars of the PCB Edit menu tool-bar
Board
Register various information on the board to be produced.
Part
Register various information about the components to be placed.
Feeder
Sets the data related to the Tape, Stick, and Tray Feeder.
Step
Defines the step for placement operation.
ANC Cfg
Shows the nozzle information when the nozzles of the previous PCB file and current
system ANC are different.
Cycle
Checks the cycle by step.
Opti
Executes Optimizer.
Cancel
Closes the dialog box for the Board, Part, Feeder, and Step.
2.1.2.2.2. The submenu tool-bars of the production menu tool-bar
Start
Starts operation after downloading PCB.
Stop
Stops operation.
Cont
Continues previous operation.
Finish
Finishes the downloaded operation completely.
T/F Count
Sets the position of the pocket to start picking up components from the Tray Feeder.
PCB Data Down Load To VME
Transmits PCB operation data to the machine. It is possible only when the machine
status is 'Finish'.
Placement Information
Checks the number of pickups, placements, and pickup error rates by head, nozzle,
and feeder.
Status Information
Samsung Component Placer CP45FV Series Administrator’s Guide
Checks the overall operation of the System.
2.1.2.2.3. The submenu tool-bars of the Utility menu tool-bar
Print
Used to print a PCB file or system data.
Pd. Info
Displays various production management data for the machine(total time, placement
information, and error information).
Copy
Use it to copy the existing PCB file data to other PCB files.
File Man
Use it to copy, delete, rename and clear the files related to MMI.
By Pass
Use it to bypass a PCB on the conveyor without placement operation.
Warmup
Warms up the driving axis after power supply.
2.1.2.2.4. The submenu tool-bars of the Diagnosis menu tool-bar
I / O
Check the I/O status.
Conveyor
Checks the Stopper, Backup Table, Hole/Edge Fixture, and Conveyor Flow.
Light
Checks the Camera Light.
Vacuum
Checks the Vacuum of each head
Jogbox
Checks the Jogbox function.
Tray
Checks the Tray Feeder function.
2.1.2.2.5. The submenu tool-bars of the Sys. Setup menu tool-bar
Head
Displays and sets the status of Head Block.
Limit
Sets the position limit for each axis to move.
Offset
Sets the offset value of the actual position of each device from the reference value of
the installation position.
Origin
2-4
Structure of MMI Menu
2-5
Sets the origin of each component of the machine.
Dump
Sets the data related to the Dump Box.
Tray
Sets the data related to the Tray Feeder.
Camera
Sets various data on the Camera and executes camera calibration.
Preference
Sets various options necessary for machine operation.
Device
Manages data related to the Tape, Stick, and Nozzle.
2.1.2.2.6. ANC menu tool-bar
Register various information on ANC(Auto Nozzle Changer).
2.1.2.3. Methods for selecting a command
Figure 2-2. MMI main screen
The methods for selecting a command are as follows;
When the icon is displayed, click on the desired icon.
Display pull down menu and click on the command.
When the pull down menu is displayed, enter the underlined letter of each command
using the keyboard.